RCA RCRTBL08BE1 Quick Start Manual

READ ME FIRST!
Follow these steps to get started with your remote control.
1
Remove the battery compartment cover, insert
the provided coin-cell batteries and push each
up under the ridge in the compartment with the
"+" marking. Replace the cover.
4
STREAM 1 POWER STREAM 2
Press and hold the device key you want to
program for about 2 seconds, until the POWER
key illuminates and stays on. Then release the key.
6
MENU
VOLUME
2
Manually turn on the device you want to control.
5
CH+ 0–
VOLUME
To program the other device keys, follow these instructions again.
3
STREAM 1 STREAM 2
Find the Code List that came with the
remote. Locate the section for the type of
device you're trying to program, and find
your brand in that section. Circle the codes
for your brand and keep them handy.
MENU
If you don't see your brand listed, consult the
Owner's Manual for other programming options.
Enter the first five-digit code for your brand
in the code list (the POWER key flashes after
each digit).
Test commonly used keys with the device (for example, POWER, VOL+,
CH+, and 0 for a TV).
If these keys work, congrats! You've finished programming for this key!
If not, try steps 4 and 5 with the next code for your brand in the code
list.
RCRTBL08BE1 QSG 00 R341U1