43) Open the USB DOOR.
45) Use the SS-93 to release the first clip holding the
bottom end of the ENGINE BOARD.
47) Remove the ENGINE BOARD.
19
44) Use the SS-93 to release the SIM CARD READER
connector. Be careful not to damage any nearby
components.
46) Use the SS-93 to release the second clip holding
the ENGINE BOARD.
48) Use the SS-210 to remove the CAMERA MODULE.
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia C7-00
RM-675 / RM-691
Service Manual Level 1&2
Version 6.0