Denon RCD-M40 Service Manual page 24

5.3. Error display
" 13 "
C D
/
( 13 lit XX-XX：error code)
Error Code
E1-00
E1-01
E1-02
E2-00
E2-01
E2-03
E2-06
E2-10
E2-11
E2-12
E2-14
E2-15
E3-00
E3-01
E4-04
E4-05
E5-00
E6-00
E9-00
E9-01
【Heat run count at the time the error occurred】
(1) Press the "+/ 9 " button while the error code is displayed.
(2) The heat run count is displayed for 5 seconds before returning to the error code display.
" 13 "
C D
/
( 13 lit XXXX: heat run repetition count at the time the error occurred)
【Track number and elapsed time of track at the time the error occurred】
(1) Press the " 8 /-" button while the error code is displayed.
(2) The track number and elapsed time of the track at the time the error occurred are displayed for 5 seconds before
returning to the error code display.
" 13 "
C D
/
( 13 lit mm:ss: elapsed time of track at the time the error occurred)
E X - X X
Disc cannot be detected.
Tracking offset adjustment not possible.
Focus offset adjustment not possible.
The focus servo was disabled during playback.
The focus servo was disabled during searching.
The focus servo was disabled during TOC reading.
The focus servo was disabled during manual search.
Subcode became unreadable during playback.
Subcode became unreadable during searching.
Subcode became unreadable during TOC reading.
Subcode cannot be read while pausing.
Subcode cannot be read during manual search.
TOC could not be read within the specified time.
PVD/SVD analysis was not be completed within the specified time.
Search time out (The search was not completed within the specified time).
Decoder bus error (Error in communications with CD decoder).
Inner switch is not on.
Inner switch is not off.
A CD u-COM error occurred
Error other than above.
X X X X
0 1 Tr 0 1 : 4 7
Description
24