Section 3-5 - Mounting; Figure 3-17 Dc And Battery Connection On The Audio Booster Pc Board - Wheelock SAFEPATH4 Application, Installation, Operation, And Maintenance Manual
Hide thumbs
Also See for SAFEPATH4:
Table of Contents
Advertisement
DC and Battery Connection on the Audio Booster PC Board
Section 3-5 - Mounting
Location
CAUTION: The panel shall be mounted in a location within the environmental limits specified
for indoor control panels. The panel shall not be located in a hazardous area.
1.
See Figure 3-18 on page 35, for panel mounting hole layout.
2.
Mark and drill mounting holes for appropriate screws and anchors to ensure secure
mounting to the type of surface at the selected location.
3.
Prevent dust and dirt contamination of the SAFEPATH4 Audio Booster panel during
installation. This contamination can interfere with the operation and reduce the life of the
equipment.
4.
Open the door and mount the SAFEPATH4 Audio Booster panel at the selected location.
Use care to avoid damage to the module during installation. Do not apply excessive
pressure to the PC board or its components, including field wiring terminals and connectors.
TB4
DC IN
DC OUT
BATTERY
DC and BATTERY
Connections
Figure 3-17
34
Advertisement
Table of Contents
