Download Print this page

Diamond Products CC800M Operator's Manual

Core cut masonry saw

Download this manual

DIAMOND

P R O D U C T S

OPERATOR'S MANUAL

CO RE CUT

MASONRY SAW

M O DEL:

CC8 0 0 M

Page 1 DIAMOND P R O D U C T S OPERATOR’S MANUAL CO RE CUT MASONRY SAW M O DEL: CC8 0 0 M...
Page 2: Safety Warnings
SAFETY WARNINGS PERSONAL SAFETY • Read and understand instructions before operating saw. • not operate the saw under influence drugs alcohol. • Always wear safety-approved hearing, eye, head and respiratory protection. • Sturdy boots with non-slip soles aid in providing proper footing. steel-toed safety boots recommended.
Page 3 OPERATING INSTRUCTIONS: BLADE MOUNTING: Be certain that have the correct diamond blade for the application. Contact your authorized service dealer for correct specification. Getting the correct blade will made a tremendous difference in your blade costs performance. The blade shaft flanges and arbor must be inspected...
Page 4 ...
Page 5 Diamond Products for the nearest Authorized Service Center. If motor or engine is serviced by an unauthorized service center, warranty will be voided. When transporting saw, remove cutting head from frame.
Page 6: Specifications
SPECIFICATIONS Blade Capacity: 20" 24" & Maximum Depth of Cut: 8" & 10" Respectively 0.005-1 Tc8 6D 9 .48 Tm( )Tj /CS0 cs 0.169 0.165 0.157 B63c 4.24848 Tm( )Tj /CS0 cs 0.169 0.165 0.157 B6j 0.8j r ef528.02 573.Tj 0.8j 0.8j r ef59 Arbor Size: 1"...