Music Player Mode; Connecting To A Computer - RIP TUNES MVR-3200 User Manual

MUSIC PLAYER MODE

To access the Music player mode, go to
the main menu screen (press stop a few
times if necessary) and use the REW/FF
buttons to select Music.
This is the mode where you play all of the
music that is loaded on the device. From
Music Player mode, Press Menu (M) To
access your music library.
Use the REW/FF buttons to highlight a menu op-
tion and press the Menu button to select it. You
can exit or go back in the menu at any time by
pressing the Stop button on the other side of the
device. If music is playing, you'll need to press
stop before the menu can be accessed.
From this menu, you can select whether to play
all songs, play by artist, album, or genre. You can
also "refresh playlist" after new music is copied
from your computer so the player can see it.

CONNECTING TO A COMPUTER

You can transfer music or voice recordings to and
from your PC by connecting a micro-USB cable to
the unit and then to a PC. It will display as a drive
letter or volume with the Folders "MUSIC" and "RE-
CORD". Here, you can organize and delete files, or
transfer files between your PC and the device.
SYSTEM SETTINGS MODE
To access the System Settings menu,
go to the main menu screen (press stop
a few times if necessary) and use REW/
FF to select System. Note: Recording
settings are changed in Record Mode, not
here in settings.
–10–