HP R/T2200 G4 ERM Disassembly Instructions page 5

7. Loosen the screws fixing the cables on the Fuse Board, and loosen the screws fixing the Fuse Board, and
then remove the Fuse Board.
8. Loosen the nuts fixing the ground cable to the mainframe, and loosen the screws fixing the rear panel ASSY,
and then remove the rear panel assembly.
9. Disassemble the rear panel ASSY into separate parts.
EL-MF877-00
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 5