Panasonic Diga DMR-T6070 Operating Instructions Manual page 7

≥The equipment connections described are examples.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Peripheral equipment and optional cables sold separately unless otherwise indicated.
Connection with a television and video cassette recorder
The connection will allow the video cassette recorder to be used for playback when this unit is turned off. Change the video input appropriately
on the television. For optimum operation, it is recommended that this unit be connected as shown below.
indicates included accessories.
indicates accessories not included.
Video cassette recorder
Audio/Video cable
To OUT1 or OUT2
This unit
Cooling fan
S-VIDEO OUT terminal
Connect to S-VIDEO IN terminal on the television
through a S-Video cable.
The S-VIDEO OUT terminal achieves a more vivid
picture than the VIDEO OUT terminal. (Actual
results depend on the television.)
AC power supply cord
Connect only after all other connections are complete.
To household AC outlet
(AC 120 V, 60 Hz)
∫ The unit's RF OUT terminal
The picture and sound signal from this unit does not go through the
RF OUT terminal to the television.
Make sure you connect one of the following terminals on this unit to
the television: the AUDIO/VIDEO OUT terminal, the S-VIDEO OUT
terminal or the COMPONENT VIDEO OUT terminal. If the
television has none of these terminals, consult your local dealer.
≥Refer to page 9 if the antenna connector doesn't match.
Television
When connecting using these terminals, ensure
you connect the audio cables to the corresponding
audio input terminals on the television.
AUDIO IN
S VIDEO IN
VIDEO IN
R L
Red White Yellow
IN
Yellow
VIDEO
IN
White
AUDIO
L
Red
AUDIO
R
Audio/Video cable
Red White Yellow
R - AUDIO - L VIDEO S-VIDEO
G-LINK
VIDEO S-VIDEO
R - AUDIO - L
Cable from wall or antenna signal
COMPONENT
VIDEO IN
75 ≠ coaxial cable
OUT
VIDEO
OUT
AUDIO
L
AUDIO
R
75 ≠ coaxial cable
To IN1 (L1)
Red White Yellow
(L1)
R - AUDIO - L VIDEO S-VIDEO
Y P P
B R
OPTICAL
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUT
R - AUDIO - L VIDEO S-VIDEO
(480P/480I) (L3)
(PCM/BITSTREAM)
COMPONENT VIDEO OUT terminal
Connect to COMPONENT VIDEO IN terminals on the
television through a component video cable.
These terminals can be used for either interlace or
progressive output ( page 53) and provide a purer
picture than the S-VIDEO OUT terminal.
≥Connect to terminals of the same color.
≥If using a BNC cable, use the BNC-RCA adaptor
plug (included) on the unit terminals.
Do not connect the unit through a video cassette recorder
Video signals fed through video cassette recorders will be affected
by copyright protection systems and the picture will not be shown
correctly on the television.
Television
This unit
VCR
≥When connecting to a television with a built in VCR, connect to
the input terminals on the television side, not the VCR side.
Splitter
VHF/UHF
RF IN
VHF/UHF
RF IN
VHF/UHF
RF OUT
RF IN
RF OUT
VHF/UHF
Television
VCR
This unit
RQT7559
7