Panasonic Diga DMR-T6070 Operating Instructions Manual page 55

TV Guide On Screen TM system
Does the TV Guide On Screen
system work with analog and digital
cable TV boxes?
I have relocated, changed my
television reception system or cable
TV box etc. How should I redo the
TV Guide On Screen TM system
setup?
Please tell me about the
downloading of television program
list data.
Why doesn't my favorite program
have more information in the
information window or expanded
information window?
What kind of information might be
seen in the MESSAGES screen?
Can I record one channel while
watching another?
If I have a power failure, will I need to
reset the timer recording programs I
have already set?
I do not want TV Guide On Screen
system to automatically appear on
screen.
I do not want to use TV Guide On
TM
Screen system.
≥Yes. The TV Guide On Screen
TM
boxes.
≥Select "Change system settings" in "SETUP" in the Navigation menu of the TV Guide
On Screen TM system. If you select "No, repeat setup process", you can then access the
TV Guide On Screen
from "TV GUIDE Setting" in the SETUP menu.
≥Channel line-up data is transmitted continuously, 24 hours a day–7 days a week.
≥Program information that contains details about each program is usually transmitted
four times a day, and the cycles last approximately 3 hours. The TV Guide On Screen
system only requires one transmission a day to maintain up-to-date program listings.
Because the unit must be turned off in order to receive new information, multiple
transmissions are conveniently scheduled early to mid-morning and early afternoon
hours.
≥The hardware that makes TV Guide On Screen
which has limited storage space. Factors used in determining which programs display
detailed program information are the number of channels turned "ON" in the CHANNEL
EDITOR screen and the availability of the descriptions.
Setting channels that cannot be received to "OFF" in the CHANNEL EDITOR screen
may increase the amount of information displayed.
≥Useful Product Related Information (PRI) such as alerting the user to new features or
data available through the TV Guide On Screen
active in all viewing areas.
If you do not connect a cable TV box
≥Yes. Change the television's input mode to "TV".
If you connect a cable TV box
≥No. The user cannot watch one program and record another.
≥In most cases the timer recording programs will be saved. However, if an extended
power failure occurs, it is strongly recommended that you verify the timer recording
programs that you had previously set. Press [PROG/CHECK] to display the SCHEDULE
screen.
≥Select "Off" in "Review options" menu, so that TV Guide On Screen
TM
only when you press [TV GUIDE].
≥Set the unit with "Auto Channel Setting" in the SETUP menu. Note that you can set
timer recording only manually after you set the unit with "Auto Channel Setting".
TM system works with both analog and digital cable TV
TM system setup screen. You can also access the setup screen
TM system possible is a computer chip
TM system. This feature may not be
Page
—
23, 47
—
—
TM
23
—
—
—
21
TM 23
system appears
50
RQT7559
55