Roland MC-505 Install Manual page 4

Roland MC-505 LCD Replacement Guide
Fig. 3 - Side Case Screw
Fig. 4 - Bottom Case Screws
Step 1: UNPLUG THE UNIT BEFORE YOU BEGIN!
To remove the bottom of the case you will need to remove the
screws from the sides and bottom of the case. There is 1 screw on
each side and 8 screws on the bottom. These screws are shown
circled in the photos above labelled Fig. 3 and Fig. 4.
Be sure to make note of which screws go where and store
them in some manner so they do not get lost.
3
produced by: glitchscience.com
2020©