Table of Contents
Advertisement
Basic operation
13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Turn the programme selector to a
▶
programme.
13.2 Setting a programme
Set the programme selector to the
1.
required programme.
→ "Programmes", Page 24
If necessary, adjust the pro-
2.
gramme settings → Page 37.
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 37
Adjust the programme settings.
▶
→ "Programmes", Page 24
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the
→ "Programmes", Page 24.
Requirement: The laundry is pre-
pared and sorted.
→ "Laundry", Page 33
Open the door.
1.
Make sure that the drum is empty.
Load the laundry unfolded into the
2.
drum.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
Basic operation en
37
Advertisement
Table of Contents
