Panasonic Toughbook CF-W2DWADZBM Operating Instructions Manual page 20

Panasonic toughbook cf-w2dwadzbm: user guide
Table of Contents

Advertisement

Starting Up/Shutting Down
Shutting Down (power off your computer)
20
When the CPU temperature rises, the computer may not power on to prevent
the CPU from overheating. Should this happen, allow the computer to cool
down then switch the power on again.
If the computer still does not power on, contact your technical support office.
(
page 60)
If the screen on the left is displayed immediately after
you turn on the power...
A password has been set to ensure the computer's security.
*1
and press the Enter key.
Enter your password
When the correct password is input, the computer will start.
When three incorrect password attempts or nothing is input for one minute, the com-
puter will power off.
*1
Supervisor Password or User Password set in the Setup Utility (not the Windows password).
1
Save important data and close each application.
2
Display the shutdown screen.
Click [start] - [Turn Off Computer].
(
page 35 "Change the Way Users log on or off")
3
Click [Turn Off].
Your computer will power off automatically.
Restarting your computer (without shutting down): click [Restart].
To shut down using the keyboard:
A Press the
B Press the Enter key.
CAUTION
Do not do the following during the shutdown/restart procedure.
• Connecting or disconnecting the AC adaptor.
• Touching the power switch.
• Performing any keyboard, touch pad or external mouse operations.
• Closing the display.
NOTE
When the DC plug is not connected to the computer, disconnect the AC cord
from your AC wall outlet. About 1.5 W of power is consumed simply by having
the AC adaptor plugged into an electrical outlet.
When you leave the computer or interrupt your work...
If you use the "Standby" or "Hibernation" function, then when you turn on the power
next time, the application software and files you were using before will be displayed,
and you can restart the same operations. (
tion" in onscreen Reference Manual)
key, the U key, and select [Turn Off] with
"Chapter 2: Standby/Hibernation Func-
.

Advertisement

Table of Contents
loading

Table of Contents