Continental Autodiagnos TPMS SE Quickstart Guide

REDI UNLOCK


Prepare REDI Sensors for installation by unlocking them. Unlock with a press of the trigger button.

SERVICE TPMS


Activate and trigger TPMS sensors. View and perform both manual and OBDII relearn procedures for select vehicles.

PROGRAM


Program Schrader EZ-Sensors in a variety of di erent ways including create, copy, copy set, and retrieve IDs from ECU.

PART# LOOKUP


View part numbers for OE, REDI, and EZ-Sensor sensors. *Note* Some vehicles may have multiple compatible part numbers.

PLACARD ADJUST


When changing tire sizes or load types. Adjust the internal placard values to match the new set.

SETTINGS/SUPPORT


Change a variety of settings inlcuding Units, language, and more. Also view tech support information.

1. Visit AutodiagnosTPMS.com to download the Autodiagnos TPMS software.
2. Open the installation ile and follow the on-screen instructions to install the software.
3. Connect the tool to your PC with the power ON.
   
   
4. Open the software, then select the "Update Tool" option.
   
   
5. After 5-10 minutes, the tool will be up-to-date.
   

1. Plug in OBDII Connector into the bottom of the tool with the power ON.
   
   
2. Plug in opposite end into vehicle's OBDII port with ignition in the ON position.