Panasonic Toughbook CF-W2DWAZZKM Operating Instructions Manual page 14

First-time Operation
14
Enter your computer name and administrator password and then select [Next].
5
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated.
Enter the correct date, time and the time zone, then select [Next].
6
NOTE
It may take some time before the computer restarts and the screen of step
is displayed. Wait, and do not press any keys, or touch the touch pad, etc.
7
If the keyboard or the touch pad etc. are operated, a message will appear
indicating that there is no response on the screen, or some screens may
appear white. In such cases, also wait until the next screen is displayed.
The computer will restart.
Enter your administrator password and select
7
8
Create a new account.
Select [start] - [Control Panel] - [User Accounts] - [Create a new account].
1
Enter a new name for the new account, then select [Next].
2
Select [Computer administrator], then select [Create Account].
3
<When you want to create a password for the new account>
4
Select the new account you have created and select [Create a password].
Follow the instructions on the screen to create a password.
Select [start] - [Turn Off Computer] - [Restart] to restart the computer.
5
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated. You can create a password reset disk beforehand (
NOTE
When creating a new user account:
If you make mail settings, create password reset disks (
conduct other related operations before creating the user account, you will
be unable to use any previous mail history or settings.
When you create the first new account, you can only select [Computer ad-
ministrator].
Once a "Computer Administrator" account has been created, you can create
additional limited user accounts.
Note also that only the added user account will be displayed in the Wel-
come screen. The account for the administrator created during Windows
setup will not be displayed.
About the Icon Enlarger:
If the characters or icons on the screen are too small and difficult to see,
after completing step 8 , select [start] - [All Programs] - [Panasonic] - [Icon
Enlarger]. This will allow you to magnify the display of characters and
icons on the screen. (
The [Icon Enlarger] can be set separately for each account.
.
"Icon Enlarger")
page 15).
page 15), or