1. XXXXXXXXXXXXXX 1. SPECIFICATIONS Part Description Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Battery capacity: 7500 mAh Jump starter Starting current: 200 A Clamps Max current: 400 A 12V USB charger DC charge input: 5 V 1 A / 2.1 A Soft pouch Rated USB output: 5 V / max 2.4 A Charging cable Environmental temperature: -25 °...
1. Plug the blue connector into the 12V Jump Starter port (A); LED (B) illuminates red. 2. Connect the red damp to positive '+' on the vehicle's battery. Connect the black clamp to negati- ve '-' on the vehicles battery. lf connected correctly LED (B) illuminates green. lf LED flashes red it's more than likely the clamps have been incorrectly connected, remove clamps &...
WARNING! 1. Disconnect the Jump starter within 30 seconds after starting your car. 2. Do not connect the red clamp and black clamp directly. 3. Do not disassemble the machine. 4. IMPORTANT SAFETY INSTRUCTIONS WARNING When using this product, basic precautions should always be followed, including the following: a) Read all the instructions prior to using the product.
dentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. o) Do not expose a jump starter. Do not expose a jump starter to fire or excessive temperature. Exposure to fire or temperature above 130°C/265°F may cause explosion.
WARRANTY CARD Product model Date of sale Company Serial number Client's signature Username The product is in good conditions and fully complete. Read and agree the terms of the warranty. GUARANTEE The warranty period starts from the date of sale of the products and covers 1 year for all power products. During the warranty period, free failures caused due to the use of poor-quality materials in the production and manufacturer workmanship admitted fault are removed.
Page 8
Manufactured under license of Daewoo International Corporation, Korea...