Download Print this page

Advertisement

Quick Links

Canopy
Assembly Manual
by Larry vs Harry

Advertisement

loading

Summary of Contents for Larry vs Harry Canopy

  • Page 1 Canopy Assembly Manual by Larry vs Harry...
  • Page 2: Before You Start

    Before you start Things you need, to attach your brandnew Canopy Bullitt with Honeycomb Board...
  • Page 3 13 MM 5 MM Grease Wrench/Spanner Hex/Allen key (metal on metal) Larry the King says: You think you are pro like me?! Real pros read the f***ing manual! Icons that will appear throughout the guide: Ouch! Be careful, you could hurt your fingers. Grease.
  • Page 4 Components...
  • Page 5 1. Canopy Tent 2. Sidebars 3. Top...
  • Page 6 Step 1 Two tips before you start attaching the Canopy...
  • Page 7 Before attaching the Canopy Raise the handlebar to the max. frame, remove the two bolts inside height to make room for the Canopy. the Canopy. Use tools 1+2. Grease the two bolts. Screw the two bolts through both Canopy frame and Bullitt frame in Step 2.
  • Page 8 Step 2 Fitting the Canopy onto the Bullitt frame...
  • Page 9 Drag the tent backwards towards Attach the velcro on the bicycle the handlebar. frame. Remember to screw the two bolts from Step 1 through both Canopy frame and Bullitt frame.
  • Page 10 Step 3 Assembling the Roof bars...
  • Page 11 Bend the bars on the roof of the Bottom view. Canopy into position. Be careful -you could cut your fingers! Tighten the screws with Tool 3 (the Hex/Allen Key), and repeat on the opposite side of the Canopy.
  • Page 12 Step 4 Assembling the Sidebars...
  • Page 13 Get your Sidebars. Unscrew the bolts. Notice that the bolts are slightly di erent. The longer bolts goes on the cargo area on the Bullitt frame. Like this..not like this. King Larry says: “Fit the Sidebars right or your ass will have to be tight! Urghhurgh!”...
  • Page 14 Step 5 Attaching the Canopy Tent to the Sidebars...
  • Page 15 Attach the velcro around the bar. Put the velcro strap through the hole. And attach it like disssss! Attach the flaps in the following order. Voila! Finished!
  • Page 16 Step 6 Attach the Top to the Roof bars...
  • Page 17 Canopy rest for 24 hours. Do it on both sides of the Canopy. It’s so the fabric can stretch. If not patient..This could happen! Broken side window or zipper could be the consequence...
  • Page 18 Step 7 Attaching the Top...
  • Page 19 Get your Top and fit the holes (A) on to Roll it forward. the back of the canopy on both sides. Stretch it forward and attach the holes Attach the velcro at the end of each on each side to the taps on the front side to the Canopy.
  • Page 20 Bullitt Shop Copenhagen Frederiksborggade 43, DK–1371 Copenhagen, Denmark www.larryvsharry.com...