Advertisement
Quick Links
Advertisement
Related Manuals for Larry vs Harry BBX
Summary of Contents for Larry vs Harry BBX
- Page 1 BBX Sidepanel Kit Assembly Manual by Larry vs Harry...
- Page 2 Step 1 Things you need to attach the BBX Sidepanel Kit Tools required In the box Wrench/Spanner Allan/Hex key Grease (metal on metal)
- Page 3 Line up all the appropriate Insert the four brackets with fittings on the Honeycomb rubber O-rings into the frame board. holes. Remember Grease, it helps to make them fit more easily! Hand tighten the two front plate brackets. Be aware: Do not tighten until sidepanels are attached!
- Page 4 Step 2 Attaching the back panel Back panel Add a bit of grease (metal on metal) Front Back...
- Page 5 Attach the fabric backpiece and then attach the Honeycomb onto the frame... backpiece and rear brackets on top of the fabric backpiece..using the four attachment points. Be aware: Only hand tighten the thread locked nuts!
- Page 6 Step 3 Attaching the sidepanels 46 cm 38 cm 29 cm 36 cm Sidepanels x2...
- Page 7 Attach both side panels using Now tighten the back brackets... the grub screws and ensuring they are aligned to the frame..and then the front plate brackets.
- Page 8 Step 4 Putting on the Top Cover...
- Page 9 Place the front of the fabric ...tension fabric using the cover over the headtube... attachment points on the side panels. Tighten the first velcro strap Pull the velcro ends together under the headset cup on the behind the steerer tube. steerer tube to ensure the covers fabric is tensioned correctly.
- Page 10 Bullitt? We partnered with a company called Vorova, who are making high quality stickers for all Bullitt accessories. They already have all templates for BBX etc, so give it a look, if you want to snazz up your Bullitt: vorova.com/partners/larryvsharry...