Related Manuals for Daewoo DABS 950
Summary of Contents for Daewoo DABS 950
- Page 1 DABS 950 BELT SANDER / ЛЕНТОВ ШЛАЙФ USER‘S MANUAL ОРИГИНАЛНА ИНСТРУКЦИЯ ЗА ЕКСПЛОАТАЦИЯ Manufactured under license of Daewoo International Corporation, Korea Произведено по лиценз на Daewoo International Corporation, Korea...
-
Page 2: General Safety Rules
GENERAL SAFETY RULES WARNING! from an outlet. Keep the cord away from heat, oil, sharp edges or moving Read and understand all instructions. parts. Replace the damaged cords Failure to follow all instructions listed immediately if you found one. The below, may result in electric shock, fire damaged cords will increase the risk of and/or serious personal injury. - Page 3 GENERAL SAFETY RULES tool. Such preventive safety measures a key that is left attached to a rotating can reduce the risk of starting the tool part of the tool may result in personal accidentally. injury. Store idle tools out of reach of children Do not overreach.
-
Page 4: Specific Safety Rules
of this manual. Use of unauthorized instructions may create a risk of parts or failure to follow maintenance electric shock or injury. SPECIFIC SAFETY RULES Make sure that the foreign objects sanding and may damage the sander such as nails and screws have been motor. - Page 5 ASSEMBLY Fitting The Dust Collection Bag This machine is fitted with a dust Fig.3 extraction outlet and collection bag. We Lock-on Button recommend that this facility is used at all times, as well as using an approved face This machine is fitted with a lock-on button.When on/off switch...
-
Page 6: Operation
Turn the centralizing knob (see 1 of Fig.6) short time. If the belt is still not running either clockwise or anti-clockwise to adjust centrally ,use the centralizing knob to fine the belt tracking until the sanding belt is adjust the position of the sanding belt. running centrally. -
Page 7: Maintenance
Maneuver the sanding belt off the rollers. NOTE: The Sanding belt has directional arrows printed on the inside of the belt (see the tension lever. 1 of Fig.8) Fig.9 Fig.8 NOTE: Caution is required as the lever is Sanding belts come in different grades i.e. under spring tension. - Page 8 contact with the sander. wear down and will be indicated by a During use, the carbon brushes will possible loss of power and excessive sparking seen through the ventilation slots. pairs. When the carbon brushes have worn down to approximately 4-5mm, they will require replacing.
-
Page 9: Specifications
SPECIFICATIONS Voltage: 230～50Hz Input Power: 950W Belt No Load Speed:380m/min LpA : 90 dB(A) KpA: 3 dB LwA : 101 dB(A) KwA: 3 dB ah=5,1 m/s K=1,5 m/s www.daewoopower.bg ９... - Page 10 www.daewoopower.bg...
- Page 11 www.daewoopower.bg...
- Page 12 ВНОСИТЕЛ: ДЖЕНЕРАЛ ДИСТРИБЮШЪН АД 1784 СОФИЯ, МЛАДОСТ 1, БУЛ. АНДРЕЙ ЛЯПЧЕВ 51 ТЕЛ.: +359 2 81 77 600, ФАКС: +359 2 81 77 601 www.daewoopower.bg...
Need help?
Do you have a question about the DABS 950 and is the answer not in the manual?
Questions and answers