Advertisement
Quick Links
User Guide
Filterjet™ Solvent Dispenser
XX6702500
Introduction
The Filterjet™ Solvent Dispenser is designed to spray a
concentrated jet of ultraclean solvent or rinse solution
on surfaces for high pressure cleaning/rinsing. This
user guide lists the components of the Filterjet™
Solvent Dispenser and describes how to assemble
them and attach the solvent dispenser to a dispensing
pressure vessel.
Components of Filterjet™
Solvent Dispenser
Trigger-lock
knob
Handle/valve
assembly
P36203w
Rev 07/20
Filter holder
Jet
nozzle
Tubing
1 of 4
Assembling the Filterjet™
Solvent Dispenser
1. Wrap polytetrafluoroethylene (PTFE) tape around
threads of fittings on filter holder, jet nozzle,
and tubing.
2. Screw tubing adapter into bottom port of
handle/valve assembly.
3. Screw filter holder into remaining port of
handle/valve assembly.
4. Screw jet nozzle into filter holder.
5. Install filter in filter holder as described in user
guide supplied with filter holder.
NOTE: Due to the direction of flow in the
solvent dispenser, it is not feasible to use an
additional depth type prefilter within the O-ring
inner diameter.
SigmaAldrich.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Millipore Filterjet 6702500 Series
Summary of Contents for Millipore Filterjet 6702500 Series
- Page 1 SigmaAldrich.com User Guide Filterjet™ Solvent Dispenser XX6702500 Introduction Assembling the Filterjet™ Solvent Dispenser The Filterjet™ Solvent Dispenser is designed to spray a concentrated jet of ultraclean solvent or rinse solution 1. Wrap polytetrafluoroethylene (PTFE) tape around threads of fittings on filter holder, jet nozzle, on surfaces for high pressure cleaning/rinsing.
- Page 2 Attaching the Filterjet™ Solvent Dispenser to a Dispensing Pressure Vessel 1. Assemble the Dispensing Pressure Vessel To attach the Filterjet™ Solvent Dispenser to a components as indicated in the user guide. Dispensing Pressure Vessel, the following additional products are required: 2.
- Page 3 The product is If leakage occurs accompanied by user instructions and bears markings from handle/valve to permit identification of EMD Millipore Corporation as assembly, replace the PTFE valve seat the manufacturer or authorized representative of this (item 3) and PTFE product within the European Community.
- Page 4 TP0001326 1.3 cm (0.5 in.) × 660 cm (260 in.) Merck, Millipore, Filterjet, and Sigma-Aldrich are trademarks of Merck KGaA, Darmstadt, Germany or its affiliates. All other trademarks are the property of their respective owners. Detailed information on trademarks is available via publicly accessible resources.
Need help?
Do you have a question about the Filterjet 6702500 Series and is the answer not in the manual?
Questions and answers