Panasonic Toughbook CF-H1ADBAZCM Operating Instructions Manual page 14

Panasonic toughbook cf-h1adbazcm: user guide
Hide thumbs Also See for Toughbook CF-H1ADBAZCM:
Table of Contents

Advertisement

First-time Operation
NOTE
PC Information Viewer
This computer periodically records the management information of the hard disk, etc. The maximum data volume for each
record is 2048 bytes. This information is only used for estimating the cause when the hard disk goes down by any
possibility. They are never sent to outside via network nor used for any other purpose except for the purpose described
the above.
To disable the function, add the check mark for [Disable the automatic save function for management information history]
in [Hard Disk Status] of PC Information Viewer, and click [OK].
(
Reference Manual "Checking the Computer's Usage Status")
Precaution against Starting Up/Shutting Down
Do not do the following
Connecting or disconnecting the AC adaptor
Pressing the power switch
Touching the screen or external mouse
14
You can change the user name, password, image, Wireless Networks (
security setting (
Remember your password. If you forget the password, you cannot use the Windows.
Creating a password reset disk beforehand is recommended.
When you set date/time/time zone and click [Next], the screen may not go to the next
step for a few minutes. Do not touch the screen, the keyboard, the mouse and wait until
the screen changes.
If "An unexpected error has occurred..." (or a similar message) is displayed, click [OK].
This is not a malfunction.
Wait until the hard disk drive indicator
4
Perform the touchscreen calibration.
To calibrate the touchscreen, do not use the digitizer pen (included). Use your fi nger or
other objects.
Before performing the calibration, close Tablet PC Input Panel.
A
Click
(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Setting].
Click [start] - [Control Panel] - [Other Control Panel Option] - [Touch Settings].
B Click [Calibrate].
C Touch each of the "+" target marks one by one, and then click [Finished].
NOTE
You can also calibrate the digitizer, if you need. (
Operation")
5
Create a new account.
A Click [start] - [Control Panel] - [User Accounts] - [Create a new account].
CAUTION
Remember your password. If you forget the password, you cannot use the Windows.
Creating a password reset disk beforehand is recommended.
) after setup of Windows.
has turned off.
Reference Manual "Touch Screen
) and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Toughbook cf-h1adbazjmToughbook cf-h1adbbgcmToughbook cf-h1adbbgjmToughbook cf-h1adbbzjmToughbook cf-h1adbdgcmToughbook cf-h1adbggcm ... Show all

Table of Contents