Page 2
Edition Notes The COLORado EXPO W User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the COLORado EXPO W as of the release date of this edition. Trademarks Chauvet, Chauvet Professional, the Chauvet logo, and COLORado are registered trademarks or trademarks of Chauvet &...
The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity. COLORado EXPO W User Manual Rev. 1...
• In the event of a serious operating problem, stop using immediately. If a Chauvet product requires service, contact Chauvet Technical Support. COLORado EXPO W User Manual Rev. 1...
2. Introduction Description The COLORado EXPO W is a rugged IP65-rated indoor/outdoor wash light that projects over 5,000 lumens of high quality 3200K warm white light with a 12° beam angle. High-resolution 16-bit dimming is smooth, and manually adjusting output is easy with its on-board rotary dimming dial. Phenomenal CRI and TLCI scores, selectable PWM, and included gel accessories make the COLORado EXPO W a versatile instrument, on-site or on camera, in any setting.
Green/Yellow Green/Yellow Green Power Linking It is possible to power link COLORado EXPO W products. See the table below for the current draw at each voltage and frequency: 100 V, 60 Hz 120 V, 60 Hz 208 V, 60 Hz...
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. Procedure The COLORado EXPO W comes with a double-yoke bracket to which the user can directly attach a mounting clamp (sold separately). Make sure the clamp is capable of supporting the weight of this product.
Shows hours LEDs have been on Information VERSION COLORado EXPO W V_._ _ Shows the current firmware version _ _ _ _ _ _ _ _ _ _ _ _ _ _ Shows the product UID Reset Reset to factory default settings Factory COLORado EXPO W User Manual Rev.
3. Set the selected value from 000–255. Configuration (Settings) Master/Slave The Master/Slave mode allows a group of COLORado EXPO W products (the slaves) to simultaneously duplicate the output of another COLORado EXPO W (the master) without a DMX controller. To set each of the slaves: 1.
Operation Dimmer Speed This setting determines how fast the output of the COLORado EXPO W changes when the output value is modified. It provides four different options to simulate the dimming curve of an incandescent lighting product. To select a specific dimmer profile, do the following: 1.
6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. COLORado EXPO W User Manual Rev. 1...
Channel Range 5-pin IP rated XLR 1, 2, 3, or 4 Ordering Product Name Item Name Item Code UPC Number COLORado EXPO W COLORADOEXPOW 01031725 781462220730 UL 1573 CSA C22.2 No. 166 E113093 COLORado EXPO W User Manual Rev. 1...
For warranty terms and conditions and return information, please visit our website. For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. COLORado EXPO W User Manual Rev. 1...
Need help?
Do you have a question about the COLORado EXPO W and is the answer not in the manual?
Questions and answers