Rohde & Schwarz SpycerNode SC Getting Started

R&S SpycerNode SC
®
Getting Started

For your Safety

All general safety instructions are located at the end of
this document. Please, read them first before starting
with the installation.
Use SpycerNode SC only in its designated purpose as
described in the product documentation. Observe the
performance limits and operating conditions stated in the
specification (data sheet).
Safety information is part of the product documenta-
tion. It warns you about the potential dangers and gives
instructions how to prevent personal injury or damage
caused by dangerous situations.
Always read the safety instructions carefully. Make sure
to fully comply with them. Do not take risks and do not
underestimate the potential danger of small details.
It is also strongly recommended to follow the instructions
in the main User Manual alongside this Getting Started
manual. The User Manual is available for download
here (reqiures registration):
https://gloris.rohde-schwarz.com/
2902.5575.02 - 04
- Open the delivery box.
1
- Locate the two transportation handles inside
the delivery box.
2
- There are four transportation hooks at each
side of the casing:
- Attach the two transportation handles to the
transportation hooks.
Make sure the openings on the handles comple-
tely embrace the hooks. Also, the openings must
be attached at the narrow end, and NOT at the
wide end.
2
X