Advertisement
Quick Links
Advertisement
Related Manuals for DAS.4 SL44
Summary of Contents for DAS.4 SL44
- Page 1 SL44 User Manual...
- Page 2 Introduction Thank you for choosing our product! Please read the user manual in order to have a complete understanding on the smartwatches features and operation method. The functions in the user manual may be slightly different from the final product. Typos and inconsistencies in this manual will be corrected in a timely manner.
-
Page 3: Buttons Instruction
Buttons Instruction 1. Touch screen 2. Turn ON & OFF button 3. Charging magnets 4. Body temperature sensor 5. Heart rate sensor Remark: When receiving an incoming call you can reject it directly from the smartwatch by pressing the side button on the screen. In order for that to happen the smartwatch must be connected with the mobile phone via Bluetooth. - Page 4 Remark: You should place the magnetic charger correctly at the pins. If the charger is not properly aligned with the pins, it will cause the circuit to burn. Connection The smartwatch can connect with the mobile phone with the “WearFit 2.0” by downloading it frm the following QR codes or by searching it on Play Store/ APP Store.
- Page 5 After installation, turn on phone Bluetooth and GPS. Open the app, confirm that the notifications and all others permissions the “wearFit 2.0” asks are enabled, and fill out your personal information. Tap “Connection Managment”, search “MT28” device (turn on the GPS in the smart phone before binding) and tap connect.
-
Page 6: Main Features
Main Features: Interface: Hold for a few second the main interface to switch the watchface. Exercise data: It counts your daily exercise amound and clears it at 24:00 everyday. You can view previous days data through the app. Sport mode: There is a variety of sports to choose from. Sleep monitor: The watch can record your total hours of sleep as well as how many of those were light sleep and how many were heavy. - Page 7 Find phone: By selecting this function your phone will start to ring and vibrate. QR code: You can scan the QR code in order to download the app. Shutdown: Select it to de-activate the watch. Settings: You can view the Bluetooth address and perform relevant settings operations.
- Page 8 Please note: The device is not a medical device. Any values shown are for reference only and does not replace the doctors medical diagnosis. Heart Rate Monitoring Function: Take a single measurement of your heart rate. You should see a green light being emitted from the bottom of the watch.
- Page 9 Find Phone Function: As the device and phone are connected, the Find Phone Function can support locating your mobile phone. Tap “Find Phone” and locate your phone via the ringtone/sound coming from your phone. Wrist Wakeup: You can “wake up” the watch with wrist movement.
- Page 10 Disclaimer 1) Please ensure that Bluetooth and mobile GPS are turned on. When searching for the device via Bluetooth, make sure that no other device is connected. When searching for the device via Bluetooth, keep a close distance between your mobile and smartwatch.
- Page 11 7) CAUTION: Do not use a power adapter that gives more than 5v = 1A to charge the device. If you use a charger larger than 1A for charging, the circuit and / or battery may be damaged. 8) Once the watch is charging, disconnect the cable from the power supply to prevent a short circuit if it comes in contact with conducting objects.
- Page 12 1) What can I do if the smartwatch doesn’t appear on the list with the available devices? First please check if the smartwatch has battery (over 20%). Then place the smartwatch close to the mobile phone and try again. If this problem still exists, please turn OFF and ON the mobiles Bluetooth and try again.
Need help?
Do you have a question about the SL44 and is the answer not in the manual?
Questions and answers