Page 2
Introduction Thank you for choosing our product! Please read the user manual in order to have a complete understanding on the smartwatches features and operation method. The functions in the user manual may be slightly different from the final product. Typos and inconsistencies in this manual will be corrected in a timely manner.
Charging instruction Charging instruction: this product adopts is using magnetic force charging. Supports 5V= 1A mobile phone charger and computer USB interface. Put the charging cable to the back of the device’s charging pins, it will charge automatically. It usually takes 2 hours to fully charge.
Connection 2) Searching and dowloading the APP in the App Store or Google Play Store. Quick connection guide Step 1: The first connection between your watch and your mobile phone. Turn on the mobile phones Bluetooth. Scan the QR code or search the "Wear Pro" APP in the APP Store or Google Play Store.
Operational Instructions Rottary Button: Press it once to turn the smartwatch screen ON/ OFF. Bottom Button: Press and hold the button for SOS calls and turning ON/ OFF the smartwatch. Open the list of Quick Functions: Swipe from left to right for a quick access to a list of functions.
Page 6
Operational Instructions Push Message: When the smartwatch is successfully bound with the APP and all the necessary licences have been accepted, the new messages that are received in the notifications bar of the mobile phone will be pushed to the smartwatch.
Page 7
Sports Data: It supports sports like walking, running, cycling, rope skipping, badminton, basketball, football, yoga, free training, elliptical. When the training is less than a minite a message appears "Too little data to save". When the training is more than a minute, the data are saved in the APP. Heart Rate: Please wear the smartwatch correctly for the Heart rate function to start messuring.
Page 8
Disclaimer 1) Please ensure that Bluetooth and mobile GPS are turned on. When searching for the device via Bluetooth, make sure that no other device is connected. When searching for the device via Bluetooth, keep a close distance between your mobile and smartwatch.
Page 9
7) CAUTION: Do not use a power adapter that gives more than 5v = 1A to charge the device. If you use a charger larger than 1A for charging, the circuit and / or battery may be damaged. 8) Once the watch is charging, disconnect the cable from the power supply to prevent a short circuit if it comes in contact with conducting objects.
Page 10
1) What can I do if the smartwatch doesn’t appear on the list with the available devices? First please check if the smartwatch has battery (over 20%). Then place the smartwatch close to the mobile phone and try again. If this problem still exists, please turn OFF and ON the mobiles Bluetooth and try again.
Need help?
Do you have a question about the SU08 and is the answer not in the manual?
Questions and answers