Advertisement
Quick Links
Sedona Collection: Full Contempo Bed
PARTS LIST
BOX 1: 4401 Contempo Full Ends
Part #
Picture
S0078END
S0079END
BOX 2: 4722 Contempo Full Frame
Part #
Picture
S1001SRL
140533/40
5040-43181
5040-35410
COMPLETED ASSEMBLY
7030-01275 KIT
For: 4722 Frame Rails/4401 Bed Ends
Description
Contempo Full Headboard
Contempo Full Footboard
Description
5/4x6 Mattress Rail
Full Individual Slat
Hex Lag Bolt/Washer
#6 x 1 1/4 Phil Flat Slat Screw
Quantity
1
1
Quantity
2
3
8
10
Advertisement
Related Manuals for Living Spaces Sedona 4401
Summary of Contents for Living Spaces Sedona 4401
- Page 1 7030-01275 KIT For: 4722 Frame Rails/4401 Bed Ends Sedona Collection: Full Contempo Bed PARTS LIST BOX 1: 4401 Contempo Full Ends Part # Picture Description Quantity S0078END Contempo Full Headboard S0079END Contempo Full Footboard BOX 2: 4722 Contempo Full Frame Part # Picture Description...
- Page 2 Attach two mattress rails(S1001SRL) to headboard assembly(S0078END) and footboard assembly(S0079END) with 8 lag bolts and 8 washers(5040-43181), and tighten. Place slat kit (sold separately) and individual slats(149533/40) in accordance with the diagram on the last page of this instruction sheet. Attach the 5 designated slats to the mattress rail cleats using the #6x1 ¼”...
-
Page 4: Parts List
7030-01285 KIT 4466 Trundle Sedona Collection: Trundle PARTS LIST BOX 1: 4466 Sedona Trundle Part # Picture Description Quantity 4466 Sedona Trundle Assembly 5048-00000 Bunkie Mattress 5045-65303 Caster Wheel 5045-65301 Caster Wheel Insert 5043-00205 Sedona Knob 5040-35643 1 1/2" Combo Truss Screw COMPLETED ASSEMBLY... - Page 5 TOOLS REQUIRED: NONE ASSEMBLY INSTRUCTIONS: 1) Push the 4 caster inserts into the pre-drilled holes on the bottom of the bed. Make sure the inserts sit flush with the holes and do not protrude. **Do no attempt to complete step 1 with the caster stems attached to the caster inserts** 4466 5045-65301 2) Once all 4 caster inserts are in place, install the caster wheels by pushing the stems of the caster wheels into the inserts...
- Page 6 7030-01195 KIT (Scan code for instructional video) Mateo/Sedona/Summit Collections: Knob and Pull Installation 1. Locate the box containing your knobs and/or pulls in the bottom drawer of your case good. 2. Identify which of the screw sizes is correct for your drawers/doors. The screw should protrude no more than 1/4"...