Page 1
7030-00449 KIT MAS90: 5043-43250 SUMMIT BUNK FRAME HARDWARE QTY: DESCRIPTION: 100MM DECORATIVE HEAD LAG BOLTS 4MM ALLEN WRENCH 1/2" X 3" FLUTED WOODEN DOWELS 6 X 1 1/4" PHIL FLAT PARTICLE BOARD SCREW 4MM DRIVER FOR POWER DRILL ASSEMBLY: 2 PERSONS AND 60 MINUTES TOOLS: 4mm Allen Wrench (INCLUDED) 4mm Allen Drill Bit (Be sure to FULLY SEAT bit into bolt head before turning)
Page 2
7030-00449 4674/4675 SUMMIT FULL/FULL BUNK BED PARTS LIST: 32 - 100mm Decorative Head Lag Bolts 1 - 4mm Allen Wrench 2 - Top End Assemblies 2 - Bottom End Assemblies 4 - 5" x 75" Mattress Rails w/Support Cleats 4 - 3 1/4" x 75" Guard Rails 4 - 1/2"...
Page 3
00500 SAFETY WARNING Summit Bunk Beds have been tested by an Independent Laboratory and are certified to be in compliance with: ASTM F-1427, “Standard Consumer Safety Specification for Bunk Beds” and U.S. Government specifications 16 Code of Federal Regulations, parts 1213 and 1513. SAFETY WARNINGS 1.