Advertisement
AP4-TY12
AmpPRO App (cont.)
This allows you to set the volume of the radio beeps that are heard through the AP4.
This allows you to enable / disable AP4 radio beeps (ie: tone that is heard when pressing radio buttons).
This is used when mixing factory and aftermarket speakers. It is also possible to turn the beeps off altogether using the radio's
factory settings menu.
This allows you to enable / disable the 3 band factory EQ.
factory EQ, as well as the Q Factor for each frequency. The Q Factor determines how many of the adjacent frequencies will be
affected when adjusting the selected frequency. The lower the Q Factor, the more frequencies will be affected.
Bass Frequency
Bass Q Factor
Connect the interface to your PC and select "Firmware", then "Update Firmware". Now select "Select File". Finally, browse to
from the PC and resume normal operation.
P
ifi A
C
ti
This allows you to set the minimum volume level of the factory radio (factory radio volume level 1).
This allows you to set the center frequency that will be adjusted when setting the 3 band
Available Frequencies and Q Factors
60HZ
80HZ
Mid Frequency
100HZ
120HZ
0.50
1.00
Mid Q Factor
1.50
2.00
© 2017 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
500HZ
1KHZ
Treble Frequency
1.5KHZ
2.5KHZ
0.75
1.00
Treble Q Factor
1.25
1.50
PAC-audio.com
7.5KHZ
10KHZ
12.5KHZ
15KHZ
0.75
1.25
Rev. 111317
Page 4
Advertisement
