Related Manuals for Rhima VU-45
Summary of Contents for Rhima VU-45
- Page 1 Operator’s Manual VU-40/VU-45/VU-50 Underbench Dishwashers VH-50 Hood Dishwashers Australia Tel: 1300 347 944 | New Zealand Tel: 0800 902 054 | Singapore Tel: +65 9107 8943...
-
Page 2: General Instructions
Do not attempt to repair the appliance. Repairs made by unqualified persons may cause further damage. • Repairs and servicing of this appliance must be carried out by Rhima personnel only. IMPORTANT CUSTOMER INFORMATION • In the event of machine malfunction please refer to the self diagnostic guide on page 7. -
Page 3: Risks And Important Warnings
NEVER overload the open door of front-loading machines, which is rated only to support the basket loaded with dishes. • NEVER use detergents or rinse additives not supplied by Rhima in this machine. The use of chemicals supplied by others may cause damage to the machine and is in contravention of your rental agreement. -
Page 4: Using The Machine
INSTRUCTION MANUAL FOR DISHWASHERS USING THE MACHINE Key and symbols BUTTON BUTTON BUTTON Switching the dishwasher on • Turn on the main electrical switch and open the external water tap. • Check that there is enough detergent and rinse aid in the tanks. •... -
Page 5: Standard Programmes
INSTRUCTION MANUAL FOR DISHWASHERS • The cycle ends with two short beeps. The START key (3) of the selected programme returns to green and the display shows the message ‘END’. The time bar flashes. • A few seconds after start-up, it is possible to start the wash cycle in advance by pressing the START key (3). -
Page 6: Turning The Dishwasher Off
INSTRUCTION MANUAL FOR DISHWASHERS Turning the dishwasher off • Press ON/OFF (1), on the DISPLAY (4) the central segments will light up, indicating that the machine is powered. Displaying information • By holding the PROGRAMME SELECTION button (2) pressed for a few seconds you can display in sequence the Boiler temperature, the Tub temperature and the number of cycles performed by the machine. -
Page 7: Self-Diagnostics
Level safety switch: Incorrect water level in the tank. Dirty filter: incorrect water level in tank due to dirty filter or overflow fitted incorrectly. IMPORTANT: In the event service is required contact Rhima Service providing the fault code possible. AUSTRALIA: 1300 347 944... - Page 8 Tel: 1300 347 944 New Zealand Tel: 0800 902 054 Singapore Tel: +65 9107 8943 DETERGENTS To request detergents or rinse additive contact your local Rhima Service centre below: Australia: 1300 347 944 New Zealand: 0800 902 054 Singapore: +65 9107 8943 Mediwash...
Need help?
Do you have a question about the VU-45 and is the answer not in the manual?
Questions and answers