Panasonic Toughbook CF-18BCAGCMM Supplementary Manual page 23

<Only for CF-19
Series with
Windows XP Tablet
PC Edition>
Tablet PC Input
Panel is hidden
under "Please
swipe your fi nger
" message.
Starting Over
If the specifi c solutions for your problem do not work, you can use these
instructions as the last measure and start over. However, please note that you can
lose your data - passwords, secret keys and fi ngerprints.
A Log on to Windows as an Administrator.
• You can always access the computer by using your Windows log on
password.
In convenient mode, any user can access the computer by using the
Windows log on password.
B Try to export your passport to a fi le if you are planning to use your
passwords, secret keys or enrolled fi ngers in the future.
• If you exported your passport recently, this step is not required.
• If biometrics authorization works and your fi nger is recognized, use "Import
or Export User Data" wizard, swipe your fi nger and continue according to
wizard's instructions.
• If biometrics authorization works, but your fi nger is not recognized, you
can start the "Import or Export User Data" wizard and export the passport
even without using your fi ngerprint. You need to cancel fi ngerprint dialog,
and you will be prompted for a password. If you do not use "Advanced
Security", enter your Windows log on password. Otherwise, enter your
"Advanced Security" backup password.
Move Tablet PC Input Panel according to the following
order.
A Log on to Windows.
B Click [start] - [All Programs] - [Protector Suite QL]
- [Control Center] - [Settings] - [System Settings].
C Remove a check mark for [Enable logon support],
and click [OK].
D Log off Windows.
E Move Tablet PC Input Panel to the bottom right or
bottom left.
F Log on to Windows.
G Click [start] - [All Programs] - [Protector Suite QL]
- [Control Center] - [Settings] - [System Settings].
H Add a check mark for [Enable logon support], and
click [OK].
23