Table of Contents
Advertisement
Assembly and Use of the Shredding/Slicing Disc with the Bowl
Fig. 7
CAUTION: Shredding/Slicing disc is sharp! Handle with care. Make sure that the appliance is unplugged from
the power source before inserting or removing the shredding/slicing disc and before cleaning.
IMPORTANT: Never feed food by hand. Always use
the food pusher to add food through the feeder tube
on the fully assembled unit.
IMPORTANT: Avoid contacting moving parts.
1
Place the motor base on a clean, dry, level surface
such as a counter or table top.
2
Align and lower the bowl onto the motor base. Handle
should be aligned slightly to the left of the "LOCK"
symbol on the motor base.
3
Rotate the container clockwise as far as it will go to
lock in place.
4
Insert the spindle into the bowl. (Fig. 7)
5
Hold the disc by the plastic hub and carefully place the
shredding/slicing disc onto the spindle. (Fig. 8)
6
Holding the lid by the feeder tube, place it on top of
the bowl aligning the on/off switch with the bowl's
handle. (Fig. 9)
Fig. 8
Fig. 9
7
Place food into the feeder tube. Using the food
pusher, add food through the feeder tube. Push the
on/off switch forward to the "On" position.
(Fig. 10)
8
When you have finished slicing or shredding, release
the on/off switch to turn the appliance off. Wait for
the disc to stop turning and then remove the lid.
9
Hold the shredding/slicing disc by the hub to remove
and then remove the spindle. Empty the food from
the bowl.
10 The spindle, shredding/slicing disc, lid and food
pusher are all top rack dishwasher safe.
CAUTION: SHREDDING/SLICING DISC IS
SHARP! HANDLE CAREFULLY WHEN CLEANING.
On/Off
Switch
Fig. 10
10
Advertisement
Table of Contents
