Warning SS125 is precision equipment. In case of hardware defects, please contact after-sales service and return to the factory. Do not to disassemble and repair it yourself, or you will lose the warranty and repair qualification.
2. SS125 Part description 1. Spotlight 5. M3 Cup head screw 2. loud speaker 6. Quick release bracket 3. micro USB port 7. Speaker servo 4. Power supply & communication cable...
M3 × 10 screws, install the quick release bracket on the M30 aircraft. 3.2 Slide the SS125 onto the quick release rack rail to the end of the rail, and shake the bottom of the SS125 to ensure it is installed in place. To ensure clear ground voice during flight, please adjust the speaker to a certain angle with the aircraft.
M30 interface. 4. DJI Pilot APP Operation 4.1 Click DJI Pilot to enter the main interface. The words SS125 PSDK will be displayed on the right side of the screen, indicating that the load identification is successful, and the next operation can be carried out. Click to...
Page 7
4.2 Enter the flight interface and click the "PSDK" button at the lower right corner of the screen to display the load function control. 1. Volume control 5. Status information list 2. Light on-off & control 6. Real time broadcast 3.
Page 8
4.3 Click the status information list to see the audio file track list on the upper left. 4.4 Click the searchlight button, slide the slider to turn on the searchlight and adjust the brightness.
Page 9
4.5 Click the volume button to control the volume. 4.6 Click the real-time broadcast button to the function...
Page 10
4.7 Click the Speak button to speak, and click to play after speaking. 4.8 Click the TTS button to enter the text to speech function...
Page 11
4.9 Enter the content in the text box, and then click Broadcast to play. 4.10 Click the menu option in the upper right corner of the screen to enter the menu bar.
Page 12
4.11 Click the PSDK button to switch the language, speed and intonation. 4.12 Audio track can be played, paused and switched. The arrow points to the current playing track.
Page 13
4.13 The searchlight angle can be adjusted up and down. 4.14 Click the SS125 version number button three times to view the product SN in the upper left corner.
5. Micro USB instructions 5.1 Audio file copy 5.1.1 Use the micro USB data cable to connect the SS125 port to the computer USB port. 5.1.2 After the connection, the computer will display a new USB flash disk for reserve equipment.
Page 15
5.2.1 Copy the upgraded firmware to the firmware folder. 5.2.2 Firmware copy is successful, exit the USB flash disk safely. 5.2.3 Connect the power supply communication cable of SS125 to the SDK socket on the longitude latitude M30. Start the drone, and the firmware will be upgraded automatically.