Getting Your Device Ready For Use - Getac PS336 Quick Start Manual

Getting Your Device Ready for Use

Installation
1. Turn the latch handle to unlock the
battery cover and detach it.
2. Select models only:
Remove the dummy card from the
SIM card slot. Slightly push in the
card to release it and then pull the
card out of the slot.
To install the SIM card, align the
card with the chip side facing up
and the beveled corner pointing to
the slot, then insert the card all the
way into the slot.
3.
Insert the battery's connector end
first and then lower the other side.
4.
Replace the battery cover and turn
the latch handle to the locked
position.
2
Charging the Battery
Connect the AC adapter to charge the
battery.
The charge indicator glows in amber
when charging is in progress. When the
battery is fully charged, the amber
indicator turns into green.
Fully charge the battery before using
your device for the first time.
Performing the Initial
Startup
1.
Press the power button (
The device powers up and you will
see the message "Tap the screen to
set up your Windows® Phone."
2.
Follow the on-screen instructions to
complete the setup wizard.
3.
Select models only: If a SIM card has
been inserted and the mobile phone
network operator (or you) has set
the PIN, you will be prompted to
enter the PIN.
4. After the setup is completed, the
Home screen appears. You can now
use your device.
).