1. Manuals
  2. Brands
  3. Redexim Manuals
  4. Cleaning Equipment
  5. Verti-Top
  6. User manual

Redexim Verti-Top User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User manual and parts
handbook
Verti-Top
Serial number:
ATTENTION:
TO ENSURE SAFE USE OF THIS MACHINE AND TO BE ABLE TO ACHIEVE THE
BEST RESULTS, IT IS OF THE UTMOST IMPORTANCE TO READ THIS USER
MANUAL THOROUGHLY BEFORE USING THE VERTI-TOP.
Manual code: 947,120,202, June 2005
Redexim
English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Verti-Top and is the answer not in the manual?

Questions and answers

Related Manuals for Redexim Verti-Top

Summary of Contents for Redexim Verti-Top

  • Page 1 Serial number: ATTENTION: TO ENSURE SAFE USE OF THIS MACHINE AND TO BE ABLE TO ACHIEVE THE BEST RESULTS, IT IS OF THE UTMOST IMPORTANCE TO READ THIS USER MANUAL THOROUGHLY BEFORE USING THE VERTI-TOP. Manual code: 947,120,202, June 2005 English...

  • Page 2: Foreword

    FOREWORD Congratulations on your purchase of the Verti-Top. To ensure the long and safe use of this Verti-Top, it is of the utmost importance for all those who will be using it to read and understand this user manual. Operation of this machine is not safe without full knowledge of the content of the manual.

  • Page 3: Safety Instructions

    In addition, user’s instructions must be prepared. Before using the Verti-Top, the user is obliged to inspect it for visible damage and defects. Any changes in the Verti-Top (including its functioning) that may affect its safety must be corrected immediately.
  • Page 4 If any modifications have been made to the Verti-Top, the present CE certificate becomes null and void and the person who made the modifications should himself make sure a new CE certificate is granted. Before each use, inspect the Verti-Top for loose bolts/nuts/parts.
  • Page 5 For use on public roads the relevant traffic rules also apply. Transporting persons is not permitted! Do not use the Verti-Top when it is dark, during heavy rain/ storms, or on slopes with a gradient greater than 20 degrees. Before starting to work, all persons who will operate the Verti-Top must be familiar with all its functions and controls.
  • Page 6 Be aware of the maximum lifting capacity of the towing vehicle. Wear suitable clothing. Wear sturdy shoes with a steel tip, wear long trousers, do up long hair and wear no loose clothing. Fig. 7 (7) Location of safety stickers (Fig.

  • Page 7: Table Of Contents

    Length of the PTO Operation of the PTO PTO information and maintenance Connecting to the tractor Adjusting the working depth Angle adjustment of the sieve Transportation of the Verti-Top Driving speed 10.0 Operation of the Verti-Top 11.0 Start/stop procedure 12.0 Emptying the waste container 13.0...

  • Page 8: Technical Data

    TECHNICAL DATA Model 1500 Working width 1.47 m (57.8”) 0 mm - 26 mm (0”-1.02”) Working depth (with new brush) Driving speed Max. 12 km/h (7.5 mph) Weight 360 kg (793.7 lbs) Recommended tractor 25 HP with minimum lifting capacity of 400 kg (881.9 lbs) Volume of waste container 170 litres (6.0 cu.

  • Page 9: First Installation, Removing The Machine From The Pallet

    9. Connect the machine to the tractor (see section 5.0). * Use the correct tractor. See the specifications. 10. Switch off the tractor and lock the tractor/Verti-Top combination to prevent it from driving/sliding away. 11. Adjust the PTO to the Verti-Top tractor combination (See section 4.0).

  • Page 10: General Parts List

    GENERAL PARTS LIST Figure 9 shows some important parts: Fig. 9 Safety sticker 900.280.402: read user manual before use/toolbox. Safety sticker 933.280.402: keep a distance of at least 4 metres from the machine. Stop the engine before carrying out repairs or adjustments. Be careful of flying debris.

  • Page 11: The Pto

    2. * !! Switch off the tractor and make sure the tractor is properly blocked and cannot start moving by itself !! 3. Lower the Verti-Top to the ground until the front and rear rollers just touch the ground. 4. Measure the distance between the PTO connection of the tractor and that of the Verti-Top, from one furrow to the next.

  • Page 12: Operation Of The Pto

    4.2 OPERATION OF THE PTO To ensure correct operation of the PTO, check the following items: 1. During operation of the Verti-Top, the angle between the points of rotation may not exceed 30 degrees. 2. The rotating points should be aligned.

  • Page 13: Connecting To The Tractor

    CONNECTING TO THE TRACTOR Inspection procedure before connection of the Verti-Top: − Visually inspect the Verti-Top for signs of damage and repair these if they endanger a safe operation of the machine. − Make sure that all nuts and bolts are properly tightened.

  • Page 14: Adjusting The Working Depth

    This works as follows (see Fig 12) *!! Ensure that the tractor/Verti-Top is well blocked and cannot start moving by itself !! *!! Switch off the tractor before getting off !! 1. Open the covers 1 on both sides of the Verti-Top.

  • Page 15: Transportation Of The Verti-Top

    The user is responsible for the transport of the Verti-Top behind the tractor when travelling on public roads. Check the national traffic rules. In view of the weight of the Verti-Top, a maximum speed of 20 km/h (12.4 mph) should be observed while driving in open fields with the machine raised.

  • Page 16: Start/Stop Procedure

    The start procedure is as follows: 1. Check the Verti-Top thoroughly for lose parts and make sure all parts function properly. *!! If parts are found that are loose or do not function properly, correct the situation before using the Verti-Top!! 2.

  • Page 17: Emptying The Waste Container

    This is done as follows (see Fig. 13) 1. Drive the Verti-Top to the dumping location for collected waste. *!! Ensure that the tractor is well blocked and cannot start moving by itself !! *!! Switch off the tractor before getting off !! 2.

  • Page 18: Operation Of The Verti-Top

    The machine can be disconnected from the tractor as follows (See Fig 14) 1. Drive the Verti-Top up to its storage place, which must have a stable and flat ground. *!! Ensure that the tractor is well blocked and cannot start moving by itself !! *!! Switch off the tractor before getting off !! 2.

  • Page 19: Troubleshooting

    EP2 grease or replace the bearings. 15.0 EU CERTIFICATE We, Redexim BV, Utrechtseweg 127, 3702 AC Zeist, The Netherlands, declare entirely on our own responsibility that the product VERTI-TOP WITH MACHINE NUMBER AS INDICATED ON THE MACHINE AND IN THIS...

  • Page 20: Maintenance

    16.0 MAINTENANCE Method Time schedule Check point/lubricating point Before each use Check for loose bolts/nuts. Tighten the loose bolts/nuts with the correct torque. Presence and legibility of safety Replace if damaged or missing. stickers (Fig. 5) After first 20 operating hours Lubricate the roller bearings for Use EP 2 lubricating grease.

  • Page 21: Adjusting V-Belt Tension

    Adjustment can be accomplished as follows (See Fig 15) *!! Ensure that the Verti-Top is well blocked and cannot start moving by itself !! 1. Remove all nuts 1 and the safety cover 2. 2. Remove bolts and nuts 3 and remove the cover 4.

  • Page 22: Adjusting Brush Guideplates

    To maintain the most effective air stream, the size of the brush chamber must be reduced. The Verti-Top is equipped with a divided brush chamber in which the distance to the brush is adjustable.

  • Page 23: Exchanging The Sieve

    Adjustment can be accomplished as follows (See Fig 17) *!! Ensure that the Verti-Top is well blocked and cannot start moving by itself !! 1. Open the covers 1 on both sides of the Verti-Top. 2. Open the inspection panel 2 and lock it in retaining strip 3.

Table of Contents