Additional Functions - Skymen MECHANICAL Series Instruction Manual

Heat
S series : At first setting, the temperature is
random. Touch "Temp+" or "Temp-" to
increase or decrease temperature. Press"
on/Off" button ,heat will active before reach-
ing the setup temperature.
Plus Series Description: Heating in degrees Celsius, the progress bar indicator light flashes, which say heater starts working, heat to the
specified temperature, When Heating Stop Working, the progress bar indicator recover light . Press the knob again during the work, the
heating stop working, the progress bar indicator light flashes. The next boot,display of heater will default last temperature setting.

Additional functions

Degas:ultrasonic work for 9seconds,stop for 6seconds, work for 9seconds ets etc. till time is out.
(some cleaner do not have this function)
Semiwave: touch "Semiwave"to start half-wave Mode, ultrasonic power will cut in half. (some
cleaner do not have this function)
PLUS:The machine will work at 150-180% power (this will not affect the machine's performance
life) , which is used to clean object with stubborn stains. (Some machines do not have this
function)
Power OFF
MECHANICAL SERIES
Turn the timer button to the location of "OFF", the ultrasonic stops and the light is off. Turn the
heating button to the location of "OFF", the heating stops and the light is off. And then cut off
the power, empty out the liquid, clean the tank and the unit with cloth for next use.
Digital timer heater adjustable S series
Presss the ultrasonic "ON/OFF" button, the ultrasonic stops and the light is off. Presss the
heater "ON/OFF" button, the heating stops and the light is off. And then cut off the power, empty
out the liquid, clean the tank and the unit with cloth for next use.
MECHANICAL SERIES
If need heating, start(HEATING) to adjust required temperature, normally
40~60℃ is the best. (Heating is optional upon needs)
Time
Plus series: At first setting, the temperature
is random. Turn the rotary knob clockwise
or counterclockwise
decrease temperature. Press rotary knob
,heat will active before reaching the setup
temperature.
06
www.skymen.cc
Actual
Temperature
℃
Set
Temperature
℃
to increase or