Advertisement
Available languages
Available languages
Introduction
MIG welding units are not demanding as to the space, they are manufactured on the latest technical knowledge and therefore, most
reliable. The welding generator consist of an air-cooled transformer and a double primary coil. The DC voltage will be obtained by
using an air-cooled multi-diode bridge. *
A thermal switch protects the transformer against overloading. The plates are protected to withstand the conditions usual
for welding. The ammeters fitted on the units of the series show the instant welding current.
Welding current set-up
By means of a primary coil switch for combining the output, the generator may control as many as eight set-ups of the output.
(Fig. /E/F)
A.
MENU selection pushbutton
B.
Thermal fuse yellow LED
C.
Display :
- wire movement speed
- wire start-up time
- wire extrusion following welding
- tack welding time
- thermal overloading fuse
D.
Potentiometer
E.
Degree switching
F.
Hose pack central connection
G.
230V/400V switching
Advertisement
