Menu Set Up - Bahco BE210 Manual

English
In the camera mode, a "live" picture can be seen directly on the screen. It is strongly
advised to set-up the Video Scope properly before the first use. The indexing of
saved photos and video is based on date and time only. Other parameters, if set
before the first use, can make the operation of the Video Scope easier in the future.
Press the POWER button during 3-5 seconds to turn the display unit off.
The included side view adapter is ideal for viewing pipe walls. To fit the side view
adapter, unscrew the chrome tip of the insertion tube and replace with the side view
adapter.

3. Menu set up

The following options will be displayed ;
- Delete all - Date / time setup
- Video output - Language
Delete all
Always make sure that the materials stored in the SD card are not needed any longer,
prior to selecting this option, since everything will be deleted from the SD card!
Navigate to select DELETE ALL in the menu and press the OK button. Select YES or
NO using the UP or DOWN buttons. Confirm by pressing the OK button.
Video Output
This function allows live pictures or recorded photos and videos to be displayed on a TV
screen or beamer.First make sure that the Video format is set up according to the used
TV system PAL or NTSC . See the Menu set up section.
Connect one end of the video lens cable to the TV out jack in the display unit, and the
other end to the TV or beamer.
Press the OK button to display the menu options, select "Video Output" and press the
OK button.
The display unit screen will turn black and the image will be shown on the TV. You can
transfer the screen back to the display unit by selecting the same function.
Note: The function will detect automatically if the video cable is already inserted in the
TV OUT jack.
If the video cable is not inserted, then the screen image will revert to the
display unit.
- Video format
- Auto power off
28
-Digital Zoom
-Mirror