Related Manuals for Felder HAMMER B3
Summary of Contents for Felder HAMMER B3
- Page 1 User Manual Saw-Spindle Moulder Keep this manual handy and in good condition for continual reference! Dok.ID: 503010-903_02 • Englisch • 2008-09-01...
- Page 2 HAMMER A product of the FELDER GROUP © Felder KG KR-Felder-Str. 1 A-6060 Hall in Tirol Tel.: +43 (0) 5223 45 0 90...
- Page 5 Saw-Spindle Moulder Table of Contents Working techniques ..................57 9.7.1 Permitted working techniques.................57 9.7.2 Prohibited working techniques ...............57 9.7.3 General procedures for authorised working techniques ........58 9.7.4 Trimming.....................58 9.7.5 Longitudinal cut ...................59 9.7.6 Cutting wedges....................59 9.7.7 Cutting with an outrigger ................60 9.7.8 Cutting with the crosscut fence ...............61 9.7.9...
-
Page 13: Declaration Of Conformity
This EC Declaration of Conformity is valid only if the CE label has been affixed to the machine. Modifying or altering the machine without the express written agreement of the manufacturer shall render the war- ranty null and void. Hall in Tirol, 21.11.2006 Johann Felder, Managing Director... -
Page 36: Crosscut Fence-Extension
Saw-Spindle Moulder Making adjustments and preparations 8.6 Crosscut fence-extension The crosscut fence may be fitted with an extension as an option. 1. Loosen the thumb screw. 2. Move the crosscut fence extension to the desired measurement. " The measurement (cutting width), is read from the scale on the profile edge of the crosscut fence. -
Page 77: Adjusting/Correcting The Parallel Cutting Fence Angle
Saw-Spindle Moulder Faults 11.7 Adjusting/correcting the parallel cutting fence angle Required tools • 2 Spanners 13 mm " 1. Switch the machine off and ensure that it cannot be switched on again. 2. Check the guide angle and readjust if required. 3. - Page 78 Saw-Spindle Moulder Index 12 Index Accessories, 20 General, 6 Adjusting, 33 Groove cuts, 61 Adjusting the scoring unit, 46 Grooving tools, 48 Adjust the splitter, 45 Aligning the ball cage, 76 Assembling the outrigger table, 31 Height adjustment of the spindle moulder, 43 Assembling the scoring blade, 47 Assembly, 30 Insert moulding, 64...
- Page 79 Saw-Spindle Moulder Index Qualified personnel, 10 Safety, 9 Safety at work, 53 Safety break switches, 24 Safety during equipping, 33 Safety during installation, 68 Safety during setup, 33 Safety during transport, 26 Safety equipment, 24 Saw unit, 15 Scoring unit, 16 Setting up the machine, 19 Sliding, 36 Sliding table catch, 33...
- Page 80 KR-Felder-Straße 1 A-6060 Hall in Tirol Tel.: +43 (0) 52 23 / 45 0 90 Fax.: +43 (0) 52 23 / 45 0 99 Email: info@hammer.at Internet: www.hammer.at...
Need help?
Do you have a question about the HAMMER B3 and is the answer not in the manual?
Questions and answers