Precautions - Panasonic WV-CL920A Operating Instructions Manual

PRECAUTIONS

1. The installation should be made by qualified
service personnel or system installers.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or
covers.
There are no user serviceable parts inside. Ask a
qualified service person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking,
etc. The camera could be damaged by improper
handling or storage.
4. Do not use strong or abrasive detergents when
cleaning the camera body.
Use a dry cloth to clean the camera when dirty.
In case the dirt is hard to remove, use a mild deter-
gent and wipe gently. Afterwards, wipe off the
remained part of the detergent in it with a dry cloth.
5. Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive deter-
gents. Use lens tissue or a cotton tipped applicator
and ethanol.
6. Never face the camera towards the sun.
Do not aim the camera at bright objects. Whether
the camera is in use or not, never aim it at the sun
or other extremely bright objects. Otherwise,
blooming or smear may be caused.
7. Do not operate the camera beyond the specified
temperature, humidity or power source ratings.
Use the camera under conditions where tempera-
ture is between –10 °C - +50 °C (14 °F - 122 °F), and
humidity is below 90 %. The input power source is
120 V AC 60 Hz for WV-CL920A and 12 V DC/24 V
AC for WV-CL924A.
Caution:
To prevent fire or electric shock hazard, use a
UL listed cable (VW-1, style 1007) for the DC
12 V or AC 24 V Input Terminal.
-8-