Subscribe to Our Youtube Channel
Related Manuals for Topaz Systems GemView 7
Summary of Contents for Topaz Systems GemView 7
- Page 1 User Manual ® GemView 7 Tablet Display TD-LBK070VA-USB-R Copyright © 2020 Topaz Systems Inc. All rights reserved. For Topaz Systems, Inc. trademarks and patents, visit www.topazsystems.com/legal.
-
Page 2: Table Of Contents
GemView 7 Tablet Display User Manual Table of Contents Compliant Information ......................4 Important Safety Instructions ....................5 Declaration of RoHS2 Compliance ..................6 Copyright Information ......................7 Introduction ..........................8 Packing List ..........................8 Product Overview ........................9 Front and Side View ........9 Interactive Electromagnetic Pen .... - Page 3 GemView 7 Tablet Display User Manual Table of Contents Appendix ..........................24 Replace the Pen Tip ......................24 www.topazsystems.com Back to Top...
-
Page 4: Compliant Information
GemView 7 Tablet Display User Manual Compliant Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 5: Important Safety Instructions
GemView 7 Tablet Display User Manual Important Safety Instructions DO NOT place objects on top of the device, as objects may scratch the screen. DO NOT expose the device to dirty or dusty environments. DO NOT place the device on an uneven or unstable surface. -
Page 6: Declaration Of Rohs2 Compliance
GemView 7 Tablet Display User Manual Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply... -
Page 7: Copyright Information
GemView 7 Tablet Display User Manual Copyright Information Disclaimer: Topaz Systems, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. -
Page 8: Introduction
GemView 7 Tablet Display User Manual Introduction Packing List After unpacking, please confirm whether the following contents are included: • Tablet display • USB 2.0 cable • Electromagnetic pen • Pen tether • 3 pen tips • Pen tip replacement tool •... -
Page 9: Product Overview
GemView 7 Tablet Display User Manual Product Overview Front and Side View 1. Display and electromagnetic pen touch area 2. Pen holder 3. USB connector 4. Kensington lock slot Rear View 5. Rubber foot pad (x4) 6. Large and small supports (x2), can be extended and retracted 7. -
Page 10: Installation
GemView 7 Tablet Display User Manual Installation Connect Tablet Display to PC Connect the tablet display to the PC using the USB cable, as shown below. Notes: • Connect both USB connectors at one end of the cable to the PC, to ensure a stable power supply. -
Page 11: Connect Pen To Tablet Display
GemView 7 Tablet Display User Manual Connect Pen to Tablet Display If your pen is not already connected to the tablet display, follow these instructions: 1. Loop one end of the pen tether through the eye at the end of the pen. -
Page 12: Install Displaylink Driver For Windows 7
GemView 7 Tablet Display User Manual Install DisplayLink Driver for Windows 7 Note: If you are installing the driver for a Citrix VDA machine, or if you are using a Windows 10 client or later, you should not perform this step; continue to the section “Install GemView Tablet Display Driver”. -
Page 13: Configure Tablet Display For Installation
GemView 7 Tablet Display User Manual Configure Tablet Display for Installation Use the Display program in the control panel to configure the tablet display for your installation (see screenshot below). You may specify the following characteristics: 1. Resolution: Use the recommended resolution 2. - Page 14 GemView 7 Tablet Display User Manual After configuring the tablet display, you may test it as follows: 1. Click the identify button; the number 1 should appear on the main display and the number 2 should appear on the tablet display.
-
Page 15: Install Gemview Tablet Display Driver
GemView 7 Tablet Display User Manual Install GemView Tablet Display Driver Note: If you are using your computer in a Citrix environment, please refer to the document GemView Tablet Displays in Citrix XenDesktop Environments. If you are using your computer in VMWare Horizon environment, please refer to the document GemView Tablet Displays in VMWare Horizon Environments. -
Page 16: Configure Tablet Display For Pen Input
GemView 7 Tablet Display User Manual Configure Tablet Display for Pen Input 1. In All Apps or All Programs, under GemView Tablet Display Manager, click on Tablet Display Manager. In the Tablet Display Properties window that opens, notice that the Pen tab is selected. - Page 17 GemView 7 Tablet Display User Manual 3. Click the Mapping tab to display the screen below. Select the number of the tablet display from the drop down list. The numbering of the monitors follows that in the Windows display settings. Select the orientation of the tablet display. It should be the same orientation selected in the Windows display screen.
-
Page 18: Install Second Tablet Display And Configure For Clone Operation
GemView 7 Tablet Display User Manual Install Second Tablet Display and Configure for Clone Operation You can install a second Topaz GemView Tablet Display configured for clone operation in your system. This is very useful in electronic signing applications where there are two people involved in a signing session –... -
Page 19: Install Bundled Topaz Software
GemView 7 Tablet Display User Manual Install Bundled Topaz Software Topaz Systems provides software designed specifically to take advantage of the GemView Tablet Displays’ large format, pen input capabilities. For detailed information on pDoc Signer ® ® pDoc Signer Duo, pDoc Pro, and other software packages and drivers, visit www.topazsystems.com/gemview-software.html. -
Page 20: Troubleshooting
GemView 7 Tablet Display User Manual Troubleshooting Screen Problems Problems Recommended actions • Check whether USB cables at computer end and screen end are connected properly. • Try using another USB interface on the computer. • Confirm whether the computer is in sleep mode. Press the keyboard or move the mouse, and reboot the system. -
Page 21: Problems With The Electromagnetic Pen
GemView 7 Tablet Display User Manual Problems with the Electromagnetic Pen Problems Recommended actions • Try to confirm by mouse operation. If the mouse does not work, reboot the Electromagnetic computer or the application. pen does not work • Try to reinstall the GemView driver. -
Page 22: Product Specification
GemView 7 Tablet Display User Manual Product Specification Screen Display Model 7 inch TFT LCD, LED backlight Resolution 1024 x 600 200 cd/m 2 (typical) Brightness Angle of Visibility Horizontal 120°, vertical 80° Response Time Tr+Tf: 25ms (typical) Connector USB x1... -
Page 23: Interactive Electromagnetic Pen
GemView 7 Tablet Display User Manual Interactive Electromagnetic Pen Model Technique Electromagnetic Action Area Full screen Technical Specifications Resolution 5080 LPI (lines per inch) Tracking Velocity 200 PPS (dots per second) Pressure Sensing 2048 Levels Accuracy Rating ± 0.5mm (center), ± 1mm (edges and corners) - Page 24 GemView 7 Tablet Display User Manual Appendix Replace the Pen Tip If the pen tip is too short or exhibits a sharp edge, it can be replaced with a back-up tip. Pull out the pen tip from electromagnetic pen using the supplied tool.
Need help?
Do you have a question about the GemView 7 and is the answer not in the manual?
Questions and answers