Subscribe to Our Youtube Channel
Related Manuals for Topaz Systems GemView TD-LBK101VA-USB-R
Summary of Contents for Topaz Systems GemView TD-LBK101VA-USB-R
- Page 1 User Manual ® GemView 10 Tablet Display TD-LBK101VA-USB-R Copyright © Topaz Systems Inc. All rights reserved. For Topaz Systems, Inc. trademarks and patents, visit www.topazsystems.com/legal.
-
Page 2: Table Of Contents
GemView 10 Tablet Display User Manual Table of Contents Compliant & Copyright Information ..................3 Introduction ..........................6 Packing List ..........................6 Product Overview ........................7 Front and Side View ........7 Interactive Electromagnetic Pen ....8 Rear View ............8 Installation .......................... -
Page 3: Compliant & Copyright Information
GemView 10 Tablet Display User Manual Compliant Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. - Page 4 GemView 10 Tablet Display User Manual Important Safety Instructions DO NOT place objects on top of the device, as objects may scratch the screen. DO NOT expose the device to dirty or dusty environments. DO NOT place the device on an uneven or unstable surface. DO NOT insert any foreign objects into the device.
- Page 5 GemView 10 Tablet Display User Manual Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed...
-
Page 6: Introduction
Copyright Information Copyright © Topaz Systems, Inc. 2015. All rights reserved. Disclaimer: Topaz Systems, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. -
Page 7: Product Overview
GemView 10 Tablet Display User Manual Product Overview Front and Side View 1. Display and electromagnetic pen touch area 2. Tether hole 3. Kensington lock hole 4. Pen holder slot www.topazsystems.com Back to Top... -
Page 8: Interactive Electromagnetic Pen
GemView 10 Tablet Display User Manual Rear View 5. USB connector 6. Large and small supports (x2), can be extended or retracted 7. Rubber foot pad (x4) 8. Product label Note: Please don't open the enclosure; contact service personnel for any problem. Interactive Electromagnetic Pen The interactive electromagnetic pen is made with electromagnetic resonance technology and does not require batteries. -
Page 9: Installation
GemView 10 Tablet Display User Manual Installation Connect Tablet Display to PC To begin, follow the steps listed below to connect your GemView Tablet Display: 1. Connect the tablet display to the PC using the USB cable, as shown below. Notes: •... -
Page 10: Connect Pen To Tablet Display
GemView 10 Tablet Display User Manual Connect Pen to Tablet Display If your pen is not already connected to the tablet display, follow these instructions: 1. Loop one end of the pen tether through the eye at the end of the pen. 2. -
Page 11: Install Gemview Tablet Display Driver
GemView 10 Tablet Display User Manual After configuring the tablet display, you may test it as follows: 1. Click the identify button; the number 1 should appear on the main display and the number 2 should appear on the tablet display. 2. -
Page 12: Configure Tablet Display For Pen Input
GemView 10 Tablet Display User Manual Configure Tablet Display for Pen Input Follow the instructions below to configure your GemView Tablet Display for pen input: 1. In All Apps or All Programs, under GemView Tablet Display Manager, click on Tablet Display Manager. - Page 13 GemView 10 Tablet Display User Manual 3. Click the Mapping tab to display the screen below. Select the number of the tablet display from the drop down list. The numbering of the monitors follows that in the Windows display settings. Select Landscape or Portrait for the orientation of the tablet display.
-
Page 14: Install Bundled Topaz Software
GemView 10 Tablet Display User Manual Install Bundled Topaz Software Topaz Systems provides software designed specifically to take advantage of the GemView Tablet Displays’ large format, pen input capabilities. For detailed information on pDoc Signer ® ® pDoc Signer Duo, pDoc Pro, and other software packages and drivers, visit www.topazsystems.com/gemview-software.html. -
Page 15: Troubleshooting
GemView 10 Tablet Display User Manual Troubleshooting Screen Problems Problems Recommended actions • No picture Check whether USB cables at computer end and screen end are connected properly. • Try to use another USB interface of the computer. • Confirm whether the computer is under sleep mode. Press the keyboard or move the mouse, and reboot the system. -
Page 16: Product Specification
GemView 10 Tablet Display User Manual Product Specification Screen Display Model 10.1 inch TFT LCD, LED backlight 8H tempered glass; Anti-scratch, anti-glare, and Screen Type anti-fingerprint coating Resolution 1280 x 800 160 cd/m 2 (typical) / 200 cd/m 2 (max.) Brightness Angle of Visibility Horizontal 170°, vertical 170°... -
Page 17: Interactive Electromagnetic Pen
GemView 10 Tablet Display User Manual Interactive Electromagnetic Pen Model Technique Electromagnetic Action Area Full screen Technical Specifications Resolution 5080 LPI (lines per inch) Tracking Velocity 200 PPS (dots per second) Pressure Sensing 2048 Levels Accuracy Rating ± 0.5mm (center), ± 2mm (edges and corners) Readable Height Electromagnetic Pen Model... -
Page 18: Appendix
GemView 10 Tablet Display User Manual Appendix Replace the Pen Tip If the pen tip is too short or exists the sharp edge, it can be replaced to the back-up tip. Please replace according to the following steps: Pull out the pen tip from electromagnetic pen straightly with tool. Insert new pen tip into the handwriting pen and then push in the pen tip until the tip does not move.
Need help?
Do you have a question about the GemView TD-LBK101VA-USB-R and is the answer not in the manual?
Questions and answers