Video Cable - Panasonic WV-BP330 Operating Instructions Manual

C. WV-BP334 (24V AC 60Hz)
Connect the power cable to the AC24V IN terminal
on the rear panel of the WV-BP334.
1
Recommended wire gauge sizes for 24V AC line
Copper wire #24
size (AWG) (0.22mm )
2
Length (m) 95
of Cable
(Approx.) (ft) 314
Caution:
To prevent fire or electric shock hazard, a
UL listed wire (VW-1, style 1007) should be
used for DC 12V or AC 24V Input Terminals.
2
24 V AC, 60 Hz
(19.5 V - 28 V)
#22 #20 #18
(0.33mm ) (0.52mm ) (0.83mm
2 2
150 255 425
495 842 1 403

Video Cable

1. It is recommended to use a monitor whose resolu-
tion is at least equal to that of the camera.
2. Set the termination switch to the 75Ω position on
the last monitor.
A. Use a 75Ω coaxial cable.
B. Set the termination switch to the 75Ω posi-
tion on the last monitor and to the Hi-Z posi-
tion on the other monitors. Do not change the
positions after setting.
)
2
C. The maximum extensible coaxial cable
length between the camera and the monitor is
shown below.
-9-
Monitor
Monitor
VIDEO VIDEO
IN OUT 75Ω IN
Hi-Z
OUT 75Ω
Hi-Z