1. Manuals
  2. Brands
  3. CooKing Manuals
  4. Cookers
  5. SVIF-CK3.0
  6. Instruction manual

CooKing SVIF-CK3.0 Instruction Manual

Hide thumbs Also See for SVIF-CK3.0:
Table of Contents

Advertisement

Quick Links

INSTRUCTIONS
GUIDE
READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE MACHINE
IH
IH
IH
www.cookingsurface.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SVIF-CK3.0 and is the answer not in the manual?

Questions and answers

Related Manuals for CooKing SVIF-CK3.0

Summary of Contents for CooKing SVIF-CK3.0

  • Page 1 INSTRUCTIONS GUIDE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE MACHINE www.cookingsurface.com...
  • Page 2 TYPES OF NOISE GENERATED DURING NORMAL OPERATION OF THE APPLIANCE • CARE OF THE INVISIBLE INDUCTION HOB • INSTALLATION REQUIREMENTS AND SAFETY MEASURES • INSTALLATION • CONNECTION OF THE INDUCTION SYSTEM TO THE ELECTRICAL NETWORK • WARRANTY • INSTRUCTIONS FOR DOWNLOADING AND USING THE COOKING SURFACE APP...

  • Page 3: Security Instructions

    The use of silicone spacers is mandatory whenever the induction system is used with any other type of kitchenware not supplied by the manufacturer. CAUTION: The cooking process must be supervised. A short cooking process must be continuously monitored. WARNING: Fire Hazard: Do not place objects on cooking zones.
  • Page 4 10. If you use pans with a diameter of less than 8 cm, there is no pan on the cooking area or if the container is not suitable, then no energy will be transferred and on the display of the command will display E1 error.

  • Page 5: Specifications

    WARNING: Unattended cooking on a greasy or oily hob can be dangerous and may result in a fire. NEVER try to extinguish a fire with water, the appliance should be unplugged and then cover the flames, for example, with a lid or a fire blanket.
  • Page 6 Dashboard touch control: On / off key 2. Power adjustment key 3. Timer setting key 4. Lock key 5. Selection of cooking zone 6. Display panel Power levels and display table COOKING ZONE A Power level Watts 300W 500W 700W...

  • Page 7: Instructions Of Operation

    1 minute to one minute with a maximum of 2 hours. Once the timer is set, the LCD screen will start to count down backwards and will turn off the cooking zone when it has finished. If the time setting is 0:00, the function of the timer will remain disabled.
  • Page 8 OFF MODE: Turn off the induction hob by pressing the “ON/OFF” key twice. It will stop completely the entire heating process in the cooking zones and the fans will be switched off after a few minutes. • Others: Induction cooking is very efficient, the heat is generated directly from the bottom from the cookware immediately.
  • Page 9 LCD screen of the control. Note: If there is more than one cooking zone activated simultaneously, the level digit corresponding to each activated cooking zone will be displayed on the LCD screen of the control alternately with a frequency of 5 seconds.

  • Page 10: Error Signs

    The system cuts off power automatically for safety. Press on/off to turn off the system. “E7” + acoustic signal: Communication failure of cooking zones A or B (upper left and lower left). “E8” + acoustic signal: Communication failure of cooking zone C (right).

  • Page 11: Troubleshooting

    Remove objects that get in the way Obstructed air inlet or outlet. of the air inlet and outlet The heating cycle turns on and off in the cooking process. The material and/or size of the Replace current pan/pot and pan/pot is at the ferromagnetic try another one following the The fan is on.
  • Page 12 For this, the induction plate is equipped with fans that light up when it starts the heating of the different cooking areas. The fan will also continue to run after stopping the system if the detected temperature is still too high. The noises described in this section are normal, they are...
  • Page 13 Invisible induction hob kitchen care: Before you start cleaning, the porcelain surface must be cooled down. • Porcelain surface: The cleaning of the surface is identical to that of other similar surfaces. Do not use abrasive or corrosive cleaning agents, or cleaning utensils with metal fibers that may damage the surface.

  • Page 14: Installation

    Installation: This appliance must be installed by a qualified technician or an authorized person. 2. The connections and wiring of the electrical supply must be in accordance with the regulations and comply with the current regulations of the local authority. 3.
  • Page 15 3. Apply some of the supplied thermal conductive paste on the rubber lugs located in the center of each inductor (center points of the cooking zones). 4. For installation, place the induction hob under the porcelain surface and fix it using 2 grab bars bolted to the sides of the kitchen furniture module.

  • Page 17: Connection Diagram

    Induction system connection to the electrical grid: • The protection of the electrical installation must be in accordance with the regulations in force. • Before connecting, you must check if the voltage indicated on the nameplate is the same as the electrical grid.

  • Page 18: Warranty

    The appliance has been correctly installed (following the installation manual provided by COOKING SURFACE to authorized installation personnel), using it only with power indicated on the characteristics plate and that the cable section of the electrical supply used complies with current regulations.
  • Page 19 “RAK INDUCTION”. We clicked on RAK INDUCTION and that’s it. We have paired the mobile with the plate. Next, we will be able to select from the control of the hob, the cooking zone to go up and lower the powers after entering the key 1,2,3,4,5,6.
  • Page 20 info@.cookingsurface.com www.cookingsurface.com...

Table of Contents