Table of Contents
Advertisement
Troubles
2
The watch stops
operating.
The watch temporarily
gains/loses time.
60
EN
Troubleshooting
Possible causes
The mainspring has not been wound.
The watch has been left in extremely high or
low temperatures for a long time.
The watch has been left close to an object
with a strong magnetic field.
You drop the watch, hit it against a hard
surface, or wear it while playing active sports.
The watch is exposed to strong vibrations.
The watch has not been overhauled for more
than 3 years.
Solutions
Wind up the watch as per "How to wind the
mainspring" → (P.16), and set the time. If the
watch still does not operate, consult the
retailer from whom the watch was purchased.
Return the watch to a normal temperature so
that it works accurately as usual, and then
reset the time. The watch has been adjusted
so that it works accurately when it is worn on
your wrist under a normal temperature range
between 5°C and 35°C.
Correct this condition by moving and keeping
the watch away from the magnetic source,
and reset the time. If this action does not
correct the condition, contact the retailer from
whom the watch was purchased.
If accuracy does not return after setting the
time, consult the retailer from whom the watch
was purchased.
Consult the retailer from whom the watch was
purchased.
Advertisement
Table of Contents
