Advertisement
Set & Link
Get started by assembling and setting up
your mobile phone for its first use.
to inSert Sim-card and Battery
1 Pull out the stand and slide the backside
upwards to raise the loudspeaker.
2 Lift the battery cover away.
3 Insert the SIM-card. Note! Make sure that
the gold-coloured contacts on the card
face downwards.
4 Install the battery.
5 Slide the cover back on and press it slightly.
6 Open the cover to the multi-function jack on
the bottom of the phone. Plug the travel
Basic Use
make or anSwer caLLS
to make a call
• In Idle mode, tap the centre of the screen to open the
dialling screen. Note! You can also tap More and
select Dial number to open the dialling screen.
• Enter an area code and phone number.
• Press SEND.
• To end the call, press END.
to answer a call
• When the phone rings, press SEND.
• To end the call, press END.
To adjust the volume during a call
Move the wheel clockwise or counterclockwise.
adapter into the phone and a standard AC poweroutlet. When the phone
is completely charged (the icon is no longer moving), unplug the charger
from the power outlet and from the phone. Get started by assembling and
setting up your mobile phone for its first use.
aBoUt the Low Battery indicator
When your battery is low, the phone will emit a warning tone and a low
battery message. The battery icon will also be empty and blinking. If the
battery level becomes too low, the phone will automatically power off.
Recharge your battery to continue using your phone.
Sim card inFormation
When you subscribe to a cellular network, you receive a plug-in SIM
(Subscriber Identity Module) card loaded with your subscription details,
such as your pincode and available optional services. For 3G services,
you can purchase a USIM (Universal Subscriber Identity Module) card.
t9 mode
enter a word in t9 mode
• Select the appropriate character set once for each letter.
T9 predicts the word that you are typing.
• Enter the whole word before editing or deleting characters.
• When the word displays correctly, press SEND to insert a
space. Otherwise, tap Match to display alternative word
choices for the characters that you have entered.
aBc mode
enter a word in aBc mode
Move to the appropriate character set and press OK until
the character you want appears on the screen. To insert a
space, press SEND and enter the next word. To enter the
same letter twice or to enter a different letter on the same
character set, wait for the cursor to move to the right
automatically or turn the wheel clockwise. Then enter the
next letter.
Set & Link / Basic Use _04
Advertisement
