Panasonic PT-LB20NTU User Manual page 56

Frequently Asked Questions
Making a wireless connection while using the internet
• If you have a wireless LAN environment which allows an internet connection,
placing the projector on that network will allow you to use the internet and the
wireless connection at the same time.
• If you use a simple connection with two wireless LAN cards, since which card to
be used for the projector will not be clear, you must make the connection
between the computer and the projector through the user settings (manually).
• If you have a wired internet connection (Ethernet), this projector allows wireless
use with simultaneous wired connection to the internet.
The remote control window does not appear.
<When a simple connection is used>
• When any WebBrowser except Internet Explorer is used, the proxy settings of
the WebBrowser must be manually released.
<When a user connection is used>
• Manually release the proxy settings of the WebBrowser used.
The connection has been lost in the multi live mode.
• If a computer with a certain version of the Centrino technology (wireless LAN) is
connected to the unit, the multi live mode may be released. If this is the case,
re-establish the connection from the launcher of Wireless Manager ME 2.0. (See
pages 19 to 21.)
The connection cannot be established with IEEE802.11 g.
• Connection is sometimes established under the IEEE802.11 b standard even
when an IEEE802.11 g wireless LAN card or a computer with built-in wireless
LAN that supports the IEEE802.11 g standard is used. This is, therefore, not an
indication of trouble.
(cont.)
56