43) Unwrap the new RUBBER STOPPER.
45) Fit the C-COVER TRIM ASSY to the device. Check
the correct alignment of the clips.
47) Tighten the two TORX + size 6 screws to the
torque of 12 Ncm in the order shown.
28
44) Place the stopper onto the engine board with
the tweezers and fold the device.
46) Tighten the six TORX + size 4 screws to the
torque of 12 Ncm in the order shown. Remember to
use new screws.
48) Unwrap a new camera support clip. Place the
camera flex into the camera support clip carefully
with the tweezers.
Confidential Copyright © 2009 NOKIA All rights reserved
Nokia 3710 fold
RM-509/RM-510
Service Manual Level 1&2
Version 2.0
ISSUE 1