Polaris ASLE-L-36D User Manual page 18

ASLE-L-36D
ㆍ Press numeric values of frequency (valid range: 950MHz to 1,450MHz,
0.1MHz steps). If frequency step is greater than 0.1MHz, it is not necessary
to press the [.] key. The frequency is also set by pressing the [ENTER] key
without pressing the [MHz/ms] key.
☞ [Figure 4-3] is an example for 950.0MHz.
ㆍ Press [ESC] key to edit numeric values of frequency.
☞ The Center Freq field changes to blank as shown in [Figure 4-4].
ㆍ Press numeric values of frequency again
☞ [Figure 4-5] is an example changed to 1200.0MHz.
ㆍ Press [ENTER] key.
☞ Success !! is displayed at the Center Freq field, and numeric values are
saved.
[Figure 4-3]
[Figure 4-4]
[Figure 4-5]
Copyright © 2022 Polaris. All Rights Reserved
User Manual
18