Polaris ASLE-L-100D User Manual page 20

ASLE-L-100D
☞ [Figure 4-8] is an example for -50,000Hz.
ㆍ Press [ESC] key to edit numeric values of Doppler shift.
☞ The Doppler field changes to blank as shown in [Figure 4-9].
ㆍ Press numeric values of Doppler shift again.
☞ [Figure 4-10] is an example for -100,000Hz.
ㆍ Press [ENTER] key.
☞ Success !! is displayed at the Doppler field, and numeric values are
saved.
ㆍ When numeric values of Doppler shift are out of the valid range (-6MHz to
+6MHz), "ERR. Range: +/-6MHz" appears for 1 second as shown in [Figure
4-11], and it returns to the previous value.
[Figure 4-8]
[Figure 4-9]
[Figure 4-10]
Copyright © 2022 Polaris. All Rights Reserved
User Manual
20