Polaris ASLE-L-100D User Manual page 19

ASLE-L-100D
ㆍ When numeric values of frequency are out of the valid range (950MHz to
1,450MHz), "ERR. Out of Range" appears for 1 second as shown in [Figure
4-6], and it returns to the previous value.
ㆍ Press the [ESC] key to return to the previous menu.
③ Doppler Shift
ㆍ Press [2] key to set the Doppler shift.
☞ The pointer [▶] appears as shown in [Figure 4-7].
ㆍ Press [ENTER] key.
ㆍ Press numeric values of Doppler shift (valid range: -6MHz to +6MHz, 1Hz
steps). To set in Hz steps, press numeric values and then press the [ENTER]
key. To set in MHz steps, press any desired number from [1] to [6], press
the [MHz/ms] key and then press the [ENTER] key. Press the [-] key to
change the + and - signs.
[Figure 4-6]
[Figure 4-7]
Copyright © 2022 Polaris. All Rights Reserved
User Manual
19