NATURE'S INSTRUMENTS S NI-PG-701-01 Quick Start Manual

COMPONENTS
NATURE'S INSTRUMENTS NI-PG-701-01 ACTIVITY TABLE. NI PACKAGE INCLUDES:-
TABLE POST: x 1
1
13 x 203mm [ " x 8"] GALVANIZED LAG BOLT: x 2
2
SONOTUBE & CONCRETE ARE NOT SUPPLIED.
TABLE INSTALLATION
1. PLACEMENT OF TABLE TO ALLOW FOR CIRCULATION;
WITH THE EXCEPTION OF SEATING FOR THE TABLE, IT IS
RECOMMENDED THAT AT LEAST 915mm [36"] CLEAR
SPACE BE ALLOCATED AROUND ALL SIDES OF THE
TABLE. 1220 mm [48"] CLEAR SPACE IS PREFERRED.
2. DIG A HOLE 200mm [8"]
FOOTING HOLE TO EXTEND BELOW THE FROST LINE FOR
YOUR REGION; 1220mm [48"] BELOW FINISHED GRADE.
3. SELECT A SONOTUBE THAT IS THE SAME DIAMETER AS
THE HOLE, ALLOWING FOR 100mm [4"] OF CONCRETE TO
BE ON ALL SIDES OF THE POST.
4. INSERT SONOTUBE INTO HOLE.
5. INSERT LOG POST INTO SONOTUBE.
6. ENSURE TOP OF THE POST IS LEVEL.
FINISHED GRADE:
+0.000m [+0"}
TOP OF CONCRETE
FOOTING: -0.152m [-6"]
BOTTOM OF CONCRETE
FOOTING: -1.220m [-48"]
ACTIVITY TABLE
N
s
INSTRUMENTS
FOR YOUR PLAYGROUND
LARGER THAN THE LOG POST.
902mm [36"]
DETAIL
ACTIVITY TABLE
PRODUCT NUMBER PAGE
NI-PG- 701-01 1 OF 1
7. INSTALL CONCRETE AROUND POST. ENSURE THE TOP OF
THE CONCRETE FOOTING IS 150mm [6"] BELOW FINISHED
GRADE.
8. LET CONCRETE SET AS PER MANUFACTURER'S
RECOMMENDATIONS.
9. REMOVE THE TWO CENTRE BOARDS FROM THE TABLE
TOP.
10. PLACE TABLE TOP ON LOG POST.
11. LINE UP HOLES IN TABLE SUPPORTS WITH HOLES IN THE
LOG POST.
12. INSTALL LAG BOLTS THROUGH TABLE SUPPORTS AND
INTO LOG POST.
13. RE-FASTEN TWO CENTRE BOARDS ON TABLE TOP.
- SECTION -
SCALE @ 8.5x11 DRAWN
N.T.S.
RI
FASTENERS
REFER TO LAYOUT
FOR ADJACENT
MATERIALS
UNDISTURBED SOIL
LOG POST
CONCRETE FOOTING
CHECKED PHONE NUMBER:
1-877-733-7459
SE